Search
j0ke.net Open Build Service
>
Projects
>
vhcs
>
awstats
> awstats-6.9-ftp_conf.patch
Sign Up
|
Log In
Username
Password
Cancel
Overview
Repositories
Revisions
Requests
Users
Advanced
Attributes
Meta
File awstats-6.9-ftp_conf.patch of Package awstats
--- wwwroot/cgi-bin/awstats.model.conf.ftp +++ wwwroot/cgi-bin/awstats.model.conf.ftp @@ -0,0 +1,1503 @@ +# AWSTATS CONFIGURE FILE 6.6 +#----------------------------------------------------------------------------- +# Copy this file into awstats.www.mydomain.conf and edit this new config file +# to setup AWStats (See documentation in docs/ directory). +# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for +# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...) +# To include an environment variable in any parameter (AWStats will replace +# it with its value when reading it), follow the example: +# Parameter="__ENVNAME__" +# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with +# the config value in an AWStats running session and can be used like others. +#----------------------------------------------------------------------------- +# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $ + + + +#----------------------------------------------------------------------------- +# MAIN SETUP SECTION (Required to make AWStats work) +#----------------------------------------------------------------------------- + +# "LogFile" contains the web, ftp or mail server log file to analyze. +# Possible values: A full path, or a relative path from awstats.pl directory. +# Example: "/var/log/apache/access.log" +# Example: "../logs/mycombinedlog.log" +# You can also use tags in this filename if you need a dynamic file name +# depending on date or time (Replacement is made by AWStats at the beginning +# of its execution). This is available tags : +# %YYYY-n is replaced with 4 digits year we were n hours ago +# %YY-n is replaced with 2 digits year we were n hours ago +# %MM-n is replaced with 2 digits month we were n hours ago +# %MO-n is replaced with 3 letters month we were n hours ago +# %DD-n is replaced with day we were n hours ago +# %HH-n is replaced with hour we were n hours ago +# %NS-n is replaced with number of seconds at 00:00 since 1970 +# %WM-n is replaced with the week number in month (1-5) +# %Wm-n is replaced with the week number in month (0-4) +# %WY-n is replaced with the week number in year (01-52) +# %Wy-n is replaced with the week number in year (00-51) +# %DW-n is replaced with the day number in week (1-7, 1=sunday) +# use n=24 if you need (1-7, 1=monday) +# %Dw-n is replaced with the day number in week (0-6, 0=sunday) +# use n=24 if you need (0-6, 0=monday) +# Use 0 for n if you need current year, month, day, hour... +# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log" +# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log" +# You can also use a pipe if log file come from a pipe : +# Example: "gzip -d </var/log/apache/access.log.gz |" +# If there are several log files from load balancing servers : +# Example: "/pathtotools/logresolvemerge.pl *.log |" +# +# for vsftpd: +LogFile="/var/log/vsftpd.log" +# for pure-ftpd: +# /var/log/pureftpd.lo + + + +# Enter the log file type you want to analyze. +# Possible values: +# W - For a web log file +# S - For a streaming log file +# M - For a mail log file +# F - For a ftp log file +# Example: W +# Default: W +# +LogType=F + + +# Enter here your log format (Must match your web server config. See setup +# instructions in documentation to know how to configure your web server to +# have the required log format). +# Possible values: 1,2,3,4 or "your_own_personalized_log_format" +# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format) +# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA. +# 3 - Webstar native log format. +# 4 - Apache or Squid native common log format (NCSA common/CLF log format) +# With LogFormat=4, some features (browsers, os, keywords...) can't work. +# "your_own_personalized_log_format" = If your log is ftp, mail or other format, +# you must use following keys to define the log format string (See FAQ for +# ftp, mail or exotic web log format examples): +# %host Client hostname or IP address (or Sender host for mail log) +# %host_r Receiver hostname or IP address (for mail log) +# %lognamequot Authenticated login/user with format: "john" +# %logname Authenticated login/user with format: john +# %time1 Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss] +# %time2 Date and time with format: yyyy-mm-dd hh:mm:ss +# %time3 Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy +# %time4 Date and time with unix timestamp format: dddddddddd +# %methodurl Method and URL with format: "GET /index.html HTTP/x.x" +# %methodurlnoprot Method and URL with format: "GET /index.html" +# %method Method with format: GET +# %url URL only with format: /index.html +# %query Query string (used by URLWithQuery option) +# %code Return code status (with format for web log: 999) +# %bytesd Size of document in bytes +# %refererquot Referer page with format: "http://from.com/from.htm" +# %referer Referer page with format: http://from.com/from.htm +# %uabracket User agent with format: [Mozilla/4.0 (compatible, ...)] +# %uaquot User agent with format: "Mozilla/4.0 (compatible, ...)" +# %ua User agent with format: Mozilla/4.0_(compatible...) +# %gzipin mod_gzip compression input bytes: In:XXX +# %gzipout mod_gzip compression output bytes & ratio: Out:YYY:ZZpct. +# %gzipratio mod_gzip compression ratio: ZZpct. +# %deflateratio mod_deflate compression ratio with format: (ZZ) +# %email EMail sender (for mail log) +# %email_r EMail receiver (for mail log) +# %virtualname Web sever virtual hostname. Use this tag when same log +# contains data of several virtual web servers. AWStats +# will discard records not in SiteDomain nor HostAliases +# %cluster If log file is provided from several computers (merged by +# logresolvemerge.pl), use this to define cluster id field. +# %extraX Another field that you plan to use for building a +# personalized report with ExtraSection feature (See later). +# If your log format has some fields not included in this list, use: +# %other Means another not used field +# %otherquot Means another not used double quoted field +# +# Examples for Apache combined logs (following two examples are equivalent): +# LogFormat = 1 +# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot" +# +# Example for IIS: +# LogFormat = 2 +# +LogFormat=1 + + +# If your log field's separator is not a space, you can change this parameter. +# This parameter is not used if LogFormat is a predefined value (1,2,3,4) +# Backslash can be used as escape character. +# Example: " " +# Example: "\t" +# Example: "\|" +# Example: "," +# Default: " " +# +LogSeparator=" " + + +# "SiteDomain" must contain the main domain name, or the main intranet web +# server name, used to reach the web site. +# If you share the same log file for several virtual web servers, this +# parameter is used to tell AWStats to filter record that contains records for +# this virtual host name only (So check that this virtual hostname can be +# found in your log file and use a personalized log format that include the +# %virtualname tag). +# But for multi hosting a better solution is to have one log file for each +# virtual web server. In this case, this parameter is only used to generate +# full URL's links when ShowLinksOnUrl option is set to 1. +# If analyzing mail log, enter here the domain name of mail server. +# Example: "myintranetserver" +# Example: "www.domain.com" +# Example: "ftp.domain.com" +# Example: "domain.com" +# +SiteDomain="" + + +# Enter here all other possible domain names, addresses or virtual host +# aliases someone can use to access your site. Try to keep only the minimum +# number of possible names/addresses to have the best performances. +# You can repeat the "SiteDomain" value in this list. +# This parameter is used to analyze referer field in log file and to help +# AWStats to know if a referer URL is a local URL of same site or an URL of +# another site. +# Note: Use space between each value. +# Note: You can use regular expression values writing value with REGEX[value]. +# Note: You can also use @/mypath/myfile if list of aliases are in a file. +# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]" +# +HostAliases="localhost 127.0.0.1 REGEX[myserver\.com$]" + + +# If you want to have hosts reported by name instead of ip address, AWStats +# need to make reverse DNS lookups (if not already done in your log file). +# With DNSLookup to 0, all hosts will be reported by their IP addresses and +# not by the full hostname of visitors (except if names are already available +# in log file). +# If you want/need to set DNSLookup to 1, don't forget that this will reduce +# dramatically AWStats update process speed. Do not use on large web sites. +# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6). +# Note: Result of DNS Lookup can be used to build the Country report. However +# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to +# have an accurate Country report with no need of DNS Lookup. +# Possible values: +# 0 - No DNS Lookup +# 1 - DNS Lookup is fully enabled +# 2 - DNS Lookup is made only from static DNS cache file (if it exists) +# Default: 2 +# +DNSLookup=1 + + +# When AWStats updates its statistics, it stores results of its analysis in +# files (AWStats database). All those files are written in the directory +# defined by the "DirData" parameter. Set this value to the directory where +# you want AWStats to save its database and working files into. +# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser" +# feature (see later), you need "Write" permissions by web server user on this +# directory (and "Modify" for Windows NTFS file systems). +# Example: "/var/lib/awstats" +# Example: "../data" +# Example: "C:/awstats_data_dir" +# Default: "." (means same directory as awstats.pl) +# +DirData="/var/cache/awstats" + + +# Relative or absolute web URL of your awstats cgi-bin directory. +# This parameter is used only when AWStats is run from command line +# with -output option (to generate links in HTML reported page). +# Example: "/awstats" +# Default: "/cgi-bin" (means awstats.pl is in "/yourwwwroot/cgi-bin") +# +DirCgi="/cgi-bin" + + +# Relative or absolute web URL of your awstats icon directory. +# If you build static reports ("... -output > outputpath/output.html"), enter +# path of icon directory relative to the output directory 'outputpath'. +# Example: "/awstatsicons" +# Example: "../icon" +# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon") +# +DirIcons="/icons/awstats" + + +# When this parameter is set to 1, AWStats adds a button on report page to +# allow to "update" statistics from a web browser. Warning, when "update" is +# made from a browser, AWStats is run as a CGI by the web server user defined +# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with +# IIS), so the "DirData" directory and all already existing history files +# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if +# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems). +# Warning: Update process can be long so you might experience "time out" +# browser errors if you don't launch AWStats frequently enough. +# When set to 0, update is only made when AWStats is run from the command +# line interface (or a task scheduler). +# Possible values: 0 or 1 +# Default: 0 +# +AllowToUpdateStatsFromBrowser=0 + + +# AWStats saves and sorts its database on a month basis (except if using +# databasebreak option from command line). +# However, if you choose the -month=all from command line or +# value '-Year-' from CGI combo form to have a report for all year, AWStats +# needs to reload all data for full year (each month), and sort them, +# requiring a large amount of time, memory and CPU. This might be a problem +# for web hosting providers that offer AWStats for large sites, on shared +# servers, to non CPU cautious customers. +# For this reason, the 'full year' is only enabled on Command Line by default. +# You can change this by setting this parameter to 0, 1, 2 or 3. +# Possible values: +# 0 - Never allowed +# 1 - Allowed on CLI only, -Year- value in combo is not visible +# 2 - Allowed on CLI only, -Year- value in combo is visible but not allowed +# 3 - Possible on CLI and CGI +# Default: 2 +# +AllowFullYearView=2 + + + +#----------------------------------------------------------------------------- +# OPTIONAL SETUP SECTION (Not required but increase AWStats features) +#----------------------------------------------------------------------------- + +# When the update process runs, AWStats can set a lock file in TEMP or TMP +# directory. This lock is to avoid to have 2 update processes running at the +# same time to prevent unknown conflicts problems and avoid DoS attacks when +# AllowToUpdateStatsFromBrowser is set to 1. +# Because, when you use lock file, you can experience sometimes problems in +# lock file not correctly removed (killed process for example requires that +# you remove the file manualy), this option is not enabled by default (Do +# not enable this option with no console server access). +# Change : Effective immediatly +# Possible values: 0 or 1 +# Default: 0 +# +EnableLockForUpdate=0 + + +# AWStats can do reverse DNS lookups through a static DNS cache file that was +# previously created manually. If no path is given in static DNS cache file +# name, AWStats will search DirData directory. This file is never changed. +# This option is not used if DNSLookup=0. +# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname' +# or just 'ipaddress resolved_hostname' +# Change : Effective for new updates only +# Example: "/mydnscachedir/dnscache" +# Default: "dnscache.txt" +# +DNSStaticCacheFile="dnscache.txt" + + +# AWStats can do reverse DNS lookups through a DNS cache file that was created +# by a previous run of AWStats. This file is erased and recreated after each +# statistics update process. You don't need to create and/or edit it. +# AWStats will read and save this file in DirData directory. +# This option is used only if DNSLookup=1. +# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS +# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile. +# Change : Effective for new updates only +# Example: "/mydnscachedir/dnscachelastupdate" +# Default: "dnscachelastupdate.txt" +# +DNSLastUpdateCacheFile="dnscachelastupdate.txt" + + +# You can specify specific IP addresses that should NOT be looked up in DNS. +# This option is used only if DNSLookup=1. +# Note: Use space between each value. +# Note: You can use regular expression values writing value with REGEX[value]. +# Change : Effective for new updates only +# Example: "123.123.123.123 REGEX[^192\.168\.]" +# Default: "" +# +SkipDNSLookupFor="" + + +# The following two parameters allow you to protect a config file from being +# read by AWStats when called from a browser if web user has not been +# authenticated. Your AWStats program must be in a web protected "realm" (With +# Apache, you can use .htaccess files to do so. With other web servers, see +# your server setup manual). +# Change : Effective immediatly +# Possible values: 0 or 1 +# Default: 0 +# +AllowAccessFromWebToAuthenticatedUsersOnly=0 + + +# This parameter gives the list of all authorized authenticated users to view +# statistics for this domain/config file. This parameter is used only if +# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1. +# Change : Effective immediatly +# Example: "user1 user2" +# Example: "__REMOTE_USER__" +# Default: "" +# +AllowAccessFromWebToFollowingAuthenticatedUsers="" + + +# When this parameter is defined to something, the IP address of the user that +# reads its statistics from a browser (when AWStats is used as a CGI) is +# checked and must match one of the IP address values or ranges. +# Change : Effective immediatly +# Example: "127.0.0.1 123.123.123.1-123.123.123.255" +# Default: "" +# +AllowAccessFromWebToFollowingIPAddresses="" + + +# If the "DirData" directory (see above) does not exist, AWStats return an +# error. However, you can ask AWStats to create it. +# This option can be used by some Web Hosting Providers that has defined a +# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and +# don't want to have to create a new directory each time they add a new user. +# Change : Effective immediatly +# Possible values: 0 or 1 +# Default: 0 +# +CreateDirDataIfNotExists=0 + + +# You can choose in which format the Awstats history database is saved. +# Note: Using "xml" format make AWStats building database files three times +# larger than using "text" format. +# Change : Database format is switched after next update +# Possible values: text or xml +# Default: text +# +BuildHistoryFormat=text + + +# If you prefer having the report output pages be built as XML compliant pages +# instead of simple HTML pages, you can set this to 'xhtml' (May not work +# properly with old browsers). +# Change : Effective immediatly +# Possible values: html or xhtml +# Default: html +# +BuildReportFormat=html + + +# AWStats databases can be updated from command line of from a browser (when +# used as a cgi program). So AWStats database files need write permission +# for both command line user and default web server user (nobody for Unix, +# IUSR_xxx for IIS/Windows,...). +# To avoid permission problems between update process (run by an admin user) +# and CGI process (ran by a low level user), AWStats can save its database +# files with read and write permissions for everyone. +# By default, AWStats keeps default user permissions on updated files. If you +# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1. +# Change : Effective for new updates only +# Possible values: 0 or 1 +# Default: 0 +# +SaveDatabaseFilesWithPermissionsForEveryone=0 + + +# AWStats can purge log file, after analyzing it. Note that AWStats is able +# to detect new lines in a log file, to process only them, so you can launch +# AWStats as often as you want, even with this parameter to 0. +# With 0, no purge is made, so you must use a scheduled task or a web server +# that make this purge frequently. +# With 1, the purge of the log file is made each time AWStats update is run. +# This parameter doesn't work with IIS (This web server doesn't let its log +# file to be purged). +# Change : Effective for new updates only +# Possible values: 0 or 1 +# Default: 0 +# +PurgeLogFile=0 + + +# When PurgeLogFile is setup to 1, AWStats will clean your log file after +# processing it. You can however keep an archive file of all processed log +# records by setting this parameter (For example if you want to use another +# log analyzer). The archived log file is saved in "DirData" with name +# awstats_archive.configname[.suffix].log +# This parameter is not used if PurgeLogFile=0 +# Change : Effective for new updates only +# Possible values: 0, 1, or tags (See LogFile parameter) for suffix +# Example: 1 +# Example: %YYYY%MM%DD +# Default: 0 +# +ArchiveLogRecords=0 + + +# Each time you run the update process, AWStats overwrites the 'historic file' +# for the month (awstatsMMYYYY[.*].txt) with the updated one. +# When write errors occurs (IO, disk full,...), this historic file can be +# corrupted and must be deleted. Because this file contains information of all +# past processed log files, you will loose old stats if removed. So you can +# ask AWStats to save last non corrupted file in a .bak file. This file is +# stored in "DirData" directory with other 'historic files'. +# Change : Effective for new updates only +# Possible values: 0 or 1 +# Default: 0 +# +KeepBackupOfHistoricFiles=0 + + +# Default index page name for your web server. +# Change : Effective for new updates only +# Example: "index.php index.html default.html" +# Default: "index.html" +# +DefaultFile="index.html" + + +# Do not include access from clients that match following criteria. +# If your log file contains IP addresses in host field, you must enter here +# matching IP addresses criteria. +# If DNS lookup is already done in your log file, you must enter here hostname +# criteria, else enter ip address criteria. +# The opposite parameter of "SkipHosts" is "OnlyHosts". +# Note: Use space between each value. This parameter is not case sensitive. +# Note: You can use regular expression values writing value with REGEX[value]. +# Change : Effective for new updates only +# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]" +# Example: "localhost REGEX[^.*\.localdomain$]" +# Default: "" +# +SkipHosts="" + + +# Do not include access from clients with a user agent that match following +# criteria. If you want to exclude a robot, you should update the robots.pm +# file instead of this parameter. +# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents". +# Note: Use space between each value. This parameter is not case sensitive. +# Note: You can use regular expression values writing value with REGEX[value]. +# Change : Effective for new updates only +# Example: "konqueror REGEX[ua_test_v\d\.\d]" +# Default: "" +# +SkipUserAgents="" + + +# Use SkipFiles to ignore access to URLs that match one of following entries. +# You can enter a list of not important URLs (like framed menus, hidden pages, +# etc...) to exclude them from statistics. You must enter here exact relative +# URL as found in log file, or a matching REGEX value. Check apply on URL with +# all its query paramaters. +# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all +# pages in a particular directory, add "REGEX[^\/directorytoexclude]". +# The opposite parameter of "SkipFiles" is "OnlyFiles". +# Note: Use space between each value. This parameter is or not case sensitive +# depending on URLNotCaseSensitive parameter. +# Note: You can use regular expression values writing value with REGEX[value]. +# Change : Effective for new updates only +# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]" +# Default: "" +# +SkipFiles="" + + +# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM +# referrer. Parameter must receive a local file name containing rules applied +# on referrer field. If parameter is empty, no filter is applied. +# An example of such a file is available in lib/blacklist.txt +# You can download updated version at http://www.jayallen.org/comment_spam/ +# Change : Effective for new updates only +# Example: "/mylibpath/blacklist.txt" +# Default: "" +# +# WARNING!! Using this feature make AWStats running very slower (5 times slower +# with black list file provided with AWStats ! +# +SkipReferrersBlackList="" + + +# Include in stats, only accesses from hosts that match one of following +# entries. For example, if you want AWStats to filter access to keep only +# stats for visits from particular hosts, you can add those host names in +# this parameter. +# If DNS lookup is already done in your log file, you must enter here hostname +# criteria, else enter ip address criteria. +# The opposite parameter of "OnlyHosts" is "SkipHosts". +# Note: Use space between each value. This parameter is not case sensitive. +# Note: You can use regular expression values writing value with REGEX[value]. +# Change : Effective for new updates only +# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]" +# Default: "" +# +OnlyHosts="" + + +# Include in stats, only accesses from user agent that match one of following +# entries. For example, if you want AWStats to filter access to keep only +# stats for visits from particular browsers, you can add their user agents +# string in this parameter. +# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents". +# Note: Use space between each value. This parameter is not case sensitive. +# Note: You can use regular expression values writing value with REGEX[value]. +# Change : Effective for new updates only +# Example: "msie" +# Default: "" +# +OnlyUserAgents="" + + +# Include in stats, only accesses to URLs that match one of following entries. +# For example, if you want AWStats to filter access to keep only stats that +# match a particular string, like a particular directory, you can add this +# directory name in this parameter. +# The opposite parameter of "OnlyFiles" is "SkipFiles". +# Note: Use space between each value. This parameter is or not case sensitive +# depending on URLNotCaseSensitive parameter. +# Note: You can use regular expression values writing value with REGEX[value]. +# Change : Effective for new updates only +# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]" +# Default: "" +# +OnlyFiles="" + + +# Add here a list of kind of url (file extension) that must be counted as +# "Hit only" and not as a "Hit" and "Page/Download". You can set here all +# image extensions as they are hit downloaded that must be counted but they +# are not viewed pages. URLs with such extensions are not included in the TOP +# Pages/URL report. +# Note: If you want to exclude particular URLs from stats (No Pages and no +# Hits reported), you must use SkipFiles parameter. +# Change : Effective for new updates only +# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg" +# Example: "" +# Default: "css js class gif jpg jpeg png bmp ico" +# +NotPageList="css js class gif jpg jpeg png bmp ico swf" + + +# By default, AWStats considers that records found in web log file are +# successful hits if HTTP code returned by server is a valid HTTP code (200 +# and 304). Any other code are reported in HTTP status chart. +# Note that HTTP 'control codes', like redirection (302, 305) are not added by +# default in this list as they are not pages seen by a visitor but are +# protocol exchange codes to tell the browser to ask another page. Because +# this other page will be counted and seen with a 200 or 304 code, if you +# add such codes, you will have 2 pages viewed reported for only one in facts. +# Change : Effective for new updates only +# Example: "200 304 302 305" +# Default: "200 304" +# +ValidHTTPCodes="200 304" + + +# By default, AWStats considers that records found in mail log file are +# successful mail transfers if field that represent return code in analyzed +# log file match values defined by this parameter. +# Change : Effective for new updates only +# Example: "1 250 200" +# Default: "1 250" +# +ValidSMTPCodes="1 250" + + +# Some web servers on some Operating systems (IIS-Windows) consider that a +# login with same value but different case are the same login. To tell AWStats +# to also consider them as one, set this parameter to 1. +# Change : Effective for new updates only +# Possible values: 0 or 1 +# Default: 0 +# +AuthenticatedUsersNotCaseSensitive=0 + + +# Some web servers on some Operating systems (IIS-Windows) considers that two +# URLs with same value but different case are the same URL. To tell AWStats to +# also considers them as one, set this parameter to 1. +# Change : Effective for new updates only +# Possible values: 0 or 1 +# Default: 0 +# +URLNotCaseSensitive=0 + + +# Keep or remove the anchor string you can find in some URLs. +# Change : Effective for new updates only +# Possible values: 0 or 1 +# Default: 0 +# +URLWithAnchor=0 + + +# In URL links, "?" char is used to add parameter's list in URLs. Syntax is: +# /mypage.html?param1=value1¶m2=value2 +# However, some servers/sites use also other chars to isolate dynamic part of +# their URLs. You can complete this list with all such characters. +# Change : Effective for new updates only +# Example: "?;," +# Default: "?;" +# +URLQuerySeparators="?;" + + +# Keep or remove the query string to the URL in the statistics for individual +# pages. This is primarily used to differentiate between the URLs of dynamic +# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two +# different pages. +# Warning, when set to 1, memory required to run AWStats is dramatically +# increased if you have a lot of changing URLs (for example URLs with a random +# id inside). Such web sites should not set this option to 1 or use seriously +# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually +# URLWithQueryWithoutFollowingParameters). +# Change : Effective for new updates only +# Possible values: +# 0 - URLs are cleaned from the query string (ie: "/mypage.html") +# 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y") +# Default: 0 +# +URLWithQuery=0 + + +# When URLWithQuery is on, you will get the full URL with all parameters in +# URL reports. But among thoose parameters, sometimes you don't need a +# particular parameter because it does not identify the page or because it's +# a random ID changing for each access even if URL points to same page. In +# such cases, it is higly recommanded to ask AWStats to keep only parameters +# you need (if you know them) before counting, manipulating and storing URL. +# Enter here list of wanted parameters. For example, with "param", one hit on +# /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r +# will be reported as 2 hits on /mypage.cgi?param=abc +# This parameter is not used when URLWithQuery is 0 and can't be used with +# URLWithQueryWithoutFollowingParameters. +# Change : Effective for new updates only +# Example: "param" +# Default: "" +# +URLWithQueryWithOnlyFollowingParameters="" + + +# When URLWithQuery is on, you will get the full URL with all parameters in +# URL reports. But among thoose parameters, sometimes you don't need a +# particular parameter because it does not identify the page or because it's +# a random ID changing for each access even if URL points to same page. In +# such cases, it is higly recommanded to ask AWStats to remove such parameters +# from the URL before counting, manipulating and storing URL. Enter here list +# of all non wanted parameters. For example if you enter "id", one hit on +# /mypage.cgi?param=abc&id=Yo4UomP9d and /mypage.cgi?param=abc&id=Mu8fdxl3r +# will be reported as 2 hits on /mypage.cgi?param=abc +# This parameter is not used when URLWithQuery is 0 and can't be used with +# URLWithQueryWithOnlyFollowingParameters. +# Change : Effective for new updates only +# Example: "PHPSESSID jsessionid" +# Default: "" +# +URLWithQueryWithoutFollowingParameters="" + + +# Keep or remove the query string to the referrer URL in the statistics for +# external referrer pages. This is used to differentiate between the URLs of +# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y +# are counted as two different referrer pages. +# Change : Effective for new updates only +# Possible values: +# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html") +# 1 - Full URL with query string is used (ie: "/mypage.html?p=x&q=y") +# Default: 0 +# +URLReferrerWithQuery=0 + + +# AWStats can detect setup problems or show you important informations to have +# a better use. Keep this to 1, except if AWStats says you can change it. +# Change : Effective immediatly +# Possible values: 0 or 1 +# Default: 1 +# +WarningMessages=1 + + +# When an error occurs, AWStats outputs a message related to errors. If you +# want (in most cases for security reasons) to have no error messages, you +# can set this parameter to your personalized generic message. +# Change : Effective immediatly +# Example: "An error occurred. Contact your Administrator" +# Default: "" +# +ErrorMessages="" + + +# AWStat can be run with debug=x parameter to output various informations +# to help in debugging or solving troubles. If you want to allow this (not +# enabled by default for security reasons), set this parameter to 0. +# Change : Effective immediatly +# Possible values: 0 or 1 +# Default: 0 +# +DebugMessages=0 + + +# To help you to detect if your log format is good, AWStats reports an error +# if all the first NbOfLinesForCorruptedLog lines have a format that does not +# match the LogFormat parameter. +# However, some worm virus attack on your web server can result in a very high +# number of corrupted lines in your log. So if you experience awstats stop +# because of bad virus records at the beginning of your log file, you can +# increase this parameter (very rare). +# Change : Effective for new updates only +# Default: 50 +# +NbOfLinesForCorruptedLog=50 + + +# For some particular integration needs, you may want to have CGI links to +# point to another script than awstats.pl. +# Use the name of this script in WrapperScript parameter. +# Change : Effective immediatly +# Example: "awstatslauncher.pl" +# Default: "" +# +WrapperScript="" + + +# DecodeUA must be set to 1 if you use Roxen web server. This server converts +# all spaces in user agent field into %20. This make the AWStats robots, OS +# and browsers detection fail in some cases. Just change it to 1 if and only +# if your web server is Roxen. +# Change : Effective for new updates only +# Possible values: 0 or 1 +# Default: 0 +# +DecodeUA=0 + + +# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous +# things, that can not be tracked on other way, like: +# - Javascript disabled +# - Java enabled +# - Screen size +# - Color depth +# - Macromedia Director plugin +# - Macromedia Shockwave plugin +# - Realplayer G2 plugin +# - QuickTime plugin +# - Mediaplayer plugin +# - Acrobat PDF plugin +# To enable all these features, you must copy the awstats_misc_tracker.js file +# into a /js/ directory stored in your web document root and add the following +# HTML code at the end of your index page (but before </BODY>) : +# +# <script language=javascript src="/js/awstats_misc_tracker.js"></script> +# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript> +# +# If code is not added in index page, all those detection capabilities will be +# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats +# parameters are set to 1 to make results appear in AWStats report page. +# If you want to use another directory than /js/, you must also change the +# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file. +# Change : Effective for new updates only. +# Possible value: URL of javascript tracker file added in your HTML code. +# Default: "/js/awstats_misc_tracker.js" +# +MiscTrackerUrl="/js/awstats_misc_tracker.js" + + + +#----------------------------------------------------------------------------- +# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features) +#----------------------------------------------------------------------------- + +# The following values allow you to define accuracy of AWStats entities +# (robots, browsers, os, referers, file types) detection. +# It might be a good idea for large web sites or ISP that provides AWStats to +# high number of customers, to set this parameter to 1 (or 0), instead of 2. +# Possible values: +# 0 = No detection, +# 1 = Medium/Standard detection +# 2 = Full detection +# Change : Effective for new updates only +# Note : LevelForBrowsersDetection can also accept value "allphones". This +# enable detailed detection of phone/pda browsers. +# Default: 2 (0 for LevelForWormsDetection) +# +LevelForBrowsersDetection=2 # 0 disables Browsers detection. + # 2 reduces AWStats speed by 2% + # allphones reduces AWStats speed by 5% +LevelForOSDetection=2 # 0 disables OS detection. + # 2 reduces AWStats speed by 3% +LevelForRefererAnalyze=2 # 0 disables Origin detection. + # 2 reduces AWStats speed by 14% +LevelForRobotsDetection=2 # 0 disables Robots detection. + # 2 reduces AWStats speed by 2.5% +LevelForSearchEnginesDetection=2 # 0 disables Search engines detection. + # 2 reduces AWStats speed by 9% +LevelForKeywordsDetection=2 # 0 disables Keyphrases/Keywords detection. + # 2 reduces AWStats speed by 1% +LevelForFileTypesDetection=2 # 0 disables File types detection. + # 2 reduces AWStats speed by 1% +LevelForWormsDetection=0 # 0 disables Worms detection. + # 2 reduces AWStats speed by 15% + + + +#----------------------------------------------------------------------------- +# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features) +#----------------------------------------------------------------------------- + +# When you use AWStats as a CGI, you can have the reports shown in HTML frames. +# Frames are only available for report viewed dynamically. When you build +# pages from command line, this option is not used and no frames are built. +# Possible values: 0 or 1 +# Default: 1 +# +UseFramesWhenCGI=1 + + +# This parameter asks your browser to open detailed reports into a different +# window than the main page. +# Possible values: +# 0 - Open all in same browser window +# 1 - Open detailed reports in another window except if using frames +# 2 - Open always in a different window even if reports are framed +# Default: 1 +# +DetailedReportsOnNewWindows=1 + + +# You can add, in the HTML report page, a cache lifetime (in seconds) that +# will be returned to the browser in HTTP header answer by server. +# This parameter is not used when reports are built with -staticlinks option. +# Example: 3600 +# Default: 0 +# +Expires=0 + + +# To avoid too large web pages, you can ask AWStats to limit number of rows of +# all reported charts to this number when no other limits apply. +# Default: 1000 +# +MaxRowsInHTMLOutput=1000 + + +# Set your primary language (ISO-639-1 language codes). +# Possible values: +# Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca, +# Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz, +# Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi, +# French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu, +# Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko, +# Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl, +# Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru, +# Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr, +# Ukrainian=ua, Welsh=cy. +# First available language accepted by browser=auto +# Default: "auto" +# +Lang="auto" + + +# Set the location of language files. +# Example: "/usr/share/awstats/lang" +# Default: "./lang" (means lang directory is in same location than awstats.pl) +# +DirLang="/var/lib/awstats/lang" + + +# Show menu header with reports' links +# Possible values: 0 or 1 +# Default: 1 +# +ShowMenu=1 + + +# You choose here which reports you want to see in the main page and what you +# want to see in those reports. +# Possible values: +# 0 - Report is not shown at all +# 1 - Report is shown in main page with an entry in menu and default columns +# XYZ - Report shows column informations defined by code X,Y,Z... +# X,Y,Z... are code letters among the following: +# U = Unique visitors +# V = Visits +# P = Number of pages +# H = Number of hits (or mails) +# B = Bandwith (or total mail size for mail logs) +# L = Last access date +# E = Entry pages +# X = Exit pages +# C = Web compression (mod_gzip,mod_deflate) +# M = Average mail size (mail logs) +# + +# Show monthly summary +# Context: Web, Streaming, Mail, Ftp +# Default: UVPHB, Possible column codes: UVPHB +ShowSummary=UVPHB + +# Show monthly chart +# Context: Web, Streaming, Mail, Ftp +# Default: UVPHB, Possible column codes: UVPHB +ShowMonthStats=UVPHB + +# Show days of month chart +# Context: Web, Streaming, Mail, Ftp +# Default: VPHB, Possible column codes: VPHB +ShowDaysOfMonthStats=VPHB + +# Show days of week chart +# Context: Web, Streaming, Mail, Ftp +# Default: PHB, Possible column codes: PHB +ShowDaysOfWeekStats=PHB + +# Show hourly chart +# Context: Web, Streaming, Mail, Ftp +# Default: PHB, Possible column codes: PHB +ShowHoursStats=PHB + +# Show domains/country chart +# Context: Web, Streaming, Mail, Ftp +# Default: PHB, Possible column codes: PHB +ShowDomainsStats=PHB + +# Show hosts chart +# Context: Web, Streaming, Mail, Ftp +# Default: PHBL, Possible column codes: PHBL +ShowHostsStats=PHBL + +# Show authenticated users chart +# Context: Web, Streaming, Ftp +# Default: 0, Possible column codes: PHBL +ShowAuthenticatedUsers=0 + +# Show robots chart +# Context: Web, Streaming +# Default: HBL, Possible column codes: HBL +ShowRobotsStats=HBL + +# Show worms chart +# Context: Web, Streaming +# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL +ShowWormsStats=0 + +# Show email senders chart (For use when analyzing mail log files) +# Context: Mail +# Default: 0, Possible column codes: HBML +ShowEMailSenders=0 + +# Show email receivers chart (For use when analyzing mail log files) +# Context: Mail +# Default: 0, Possible column codes: HBML +ShowEMailReceivers=0 + +# Show session chart +# Context: Web, Streaming, Ftp +# Default: 1, Possible column codes: None +ShowSessionsStats=1 + +# Show pages-url chart. +# Context: Web, Streaming, Ftp +# Default: PBEX, Possible column codes: PBEX +ShowPagesStats=PBEX + +# Show file types chart. +# Context: Web, Streaming, Ftp +# Default: HB, Possible column codes: HBC +ShowFileTypesStats=HB + +# Show file size chart (Not yet available) +# Context: Web, Streaming, Mail, Ftp +# Default: 1, Possible column codes: None +ShowFileSizesStats=0 + +# Show operating systems chart +# Context: Web, Streaming, Ftp +# Default: 1, Possible column codes: None +ShowOSStats=1 + +# Show browsers chart +# Context: Web, Streaming +# Default: 1, Possible column codes: None +ShowBrowsersStats=1 + +# Show screen size chart +# Context: Web, Streaming +# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None +ShowScreenSizeStats=0 + +# Show origin chart +# Context: Web, Streaming +# Default: PH, Possible column codes: PH +ShowOriginStats=PH + +# Show keyphrases chart +# Context: Web, Streaming +# Default: 1, Possible column codes: None +ShowKeyphrasesStats=1 + +# Show keywords chart +# Context: Web, Streaming +# Default: 1, Possible column codes: None +ShowKeywordsStats=1 + +# Show misc chart +# Context: Web, Streaming +# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp +ShowMiscStats=a + +# Show http errors chart +# Context: Web, Streaming +# Default: 1, Possible column codes: None +ShowHTTPErrorsStats=1 + +# Show smtp errors chart (For use when analyzing mail log files) +# Context: Mail +# Default: 0, Possible column codes: None +ShowSMTPErrorsStats=0 + +# Show the cluster report (Your LogFormat must contains the %cluster tag) +# Context: Web, Streaming, Ftp +# Default: 0, Possible column codes: PHB +ShowClusterStats=0 + + +# Some graphical reports are followed by the data array of values. +# If you don't want this array (to reduce the report size for example), you +# can set thoose options to 0. +# Possible values: 0 or 1 +# Default: 1 +# +# Data array values for the ShowMonthStats report +AddDataArrayMonthStats=1 +# Data array values for the ShowDaysOfMonthStats report +AddDataArrayShowDaysOfMonthStats=1 +# Data array values for the ShowDaysOfWeekStats report +AddDataArrayShowDaysOfWeekStats=1 +# Data array values for the ShowHoursStats report +AddDataArrayShowHoursStats=1 + + +# In the Origin chart, you have stats on where your hits came from. You can +# include hits on pages that come from pages of same sites in this chart. +# Possible values: 0 or 1 +# Default: 0 +# +IncludeInternalLinksInOriginSection=0 + + +# The following parameters can be used to choose the maximum number of lines +# shown for the particular following reports. +# +# Stats by countries/domains +MaxNbOfDomain = 10 +MinHitDomain = 1 +# Stats by hosts +MaxNbOfHostsShown = 10 +MinHitHost = 1 +# Stats by authenticated users +MaxNbOfLoginShown = 10 +MinHitLogin = 1 +# Stats by robots +MaxNbOfRobotShown = 10 +MinHitRobot = 1 +# Stats by pages +MaxNbOfPageShown = 10 +MinHitFile = 1 +# Stats by OS +MaxNbOfOsShown = 10 +MinHitOs = 1 +# Stats by browsers +MaxNbOfBrowsersShown = 10 +MinHitBrowser = 1 +# Stats by screen size +MaxNbOfScreenSizesShown = 5 +MinHitScreenSize = 1 +# Stats by window size (following 2 parameters are not yet used) +MaxNbOfWindowSizesShown = 5 +MinHitWindowSize = 1 +# Stats by referers +MaxNbOfRefererShown = 10 +MinHitRefer = 1 +# Stats for keyphrases +MaxNbOfKeyphrasesShown = 10 +MinHitKeyphrase = 1 +# Stats for keywords +MaxNbOfKeywordsShown = 10 +MinHitKeyword = 1 +# Stats for sender or receiver emails +MaxNbOfEMailsShown = 20 +MinHitEMail = 1 + + +# Choose if you want the week report to start on sunday or monday +# Possible values: +# 0 - Week starts on sunday +# 1 - Week starts on monday +# Default: 1 +# +FirstDayOfWeek=1 + + +# List of visible flags that link to other language translations. +# See Lang parameter for list of allowed flag/language codes. +# If you don't want any flag link, set ShowFlagLinks to "". +# This parameter is used only if ShowMenu parameter is set to 1. +# Possible values: "" or "language_codes_separated_by_space" +# Example: "en es fr nl de" +# Default: "" +# +ShowFlagLinks="de en es fr nl" + + +# Each URL, shown in stats report views, are links you can click. +# Possible values: 0 or 1 +# Default: 1 +# +ShowLinksOnUrl=1 + + +# When AWStats builds HTML links in its report pages, it starts those links +# with "http://". However some links might be HTTPS links, so you can enter +# here the root of all your HTTPS links. If all your site is a SSL web site, +# just enter "/". +# This parameter is not used if ShowLinksOnUrl is 0. +# Example: "/shopping" +# Example: "/" +# Default: "" +# +UseHTTPSLinkForUrl="" + + +# Maximum length of URL part shown on stats page (number of characters). +# This affects only URL visible text, links still work. +# Default: 64 +# +MaxLengthOfShownURL=64 + + +# You can enter HTML code that will be added at the top of AWStats reports. +# Default: "" +# +HTMLHeadSection="" + + +# You can enter HTML code that will be added at the end of AWStats reports. +# Great to add advert ban. +# Default: "" +# +HTMLEndSection="" + + +# You can set Logo and LogoLink to use your own logo. +# Logo must be the name of image file (must be in $DirIcons/other directory). +# LogoLink is the expected URL when clicking on Logo. +# Default: "awstats_logo6.png" +# +Logo="awstats_logo6.png" +LogoLink="http://awstats.sourceforge.net" + + +# Value of maximum bar width/height for horizontal/vertical HTML graphics bars. +# Default: 260/90 +# +BarWidth = 260 +BarHeight = 90 + + +# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to +# change its look. To create a style sheet, you can use samples provided with +# AWStats in wwwroot/css directory. +# Example: "/awstatscss/awstats_bw.css" +# Example: "/css/awstats_bw.css" +# Default: "" +# +StyleSheet="" + + +# Those color parameters can be used (if StyleSheet parameter is not used) +# to change AWStats look. +# Example: color_name="RRGGBB" # RRGGBB is Red Green Blue components in Hex +# +color_Background="FFFFFF" # Background color for main page (Default = "FFFFFF") +color_TableBGTitle="CCCCDD" # Background color for table title (Default = "CCCCDD") +color_TableTitle="000000" # Table title font color (Default = "000000") +color_TableBG="CCCCDD" # Background color for table (Default = "CCCCDD") +color_TableRowTitle="FFFFFF" # Table row title font color (Default = "FFFFFF") +color_TableBGRowTitle="ECECEC" # Background color for row title (Default = "ECECEC") +color_TableBorder="ECECEC" # Table border color (Default = "ECECEC") +color_text="000000" # Color of text (Default = "000000") +color_textpercent="606060" # Color of text for percent values (Default = "606060") +color_titletext="000000" # Color of text title within colored Title Rows (Default = "000000") +color_weekend="EAEAEA" # Color for week-end days (Default = "EAEAEA") +color_link="0011BB" # Color of HTML links (Default = "0011BB") +color_hover="605040" # Color of HTML on-mouseover links (Default = "605040") +color_u="FFAA66" # Background color for number of unique visitors (Default = "FFAA66") +color_v="F4F090" # Background color for number of visites (Default = "F4F090") +color_p="4477DD" # Background color for number of pages (Default = "4477DD") +color_h="66DDEE" # Background color for number of hits (Default = "66DDEE") +color_k="2EA495" # Background color for number of bytes (Default = "2EA495") +color_s="8888DD" # Background color for number of search (Default = "8888DD") +color_e="CEC2E8" # Background color for number of entry pages (Default = "CEC2E8") +color_x="C1B2E2" # Background color for number of exit pages (Default = "C1B2E2") + + + +#----------------------------------------------------------------------------- +# PLUGINS +#----------------------------------------------------------------------------- + +# Add here all plugin files you want to load. +# Plugin files must be .pm files stored in 'plugins' directory. +# Uncomment LoadPlugin lines to enable a plugin after checking that perl +# modules required by the plugin are installed. + +# Plugin: Tooltips +# Perl modules required: None +# Add some tooltips help on HTML report pages. +# Note that enabling this kind of help will increased HTML report pages size, +# so server load and bandwidth. +# +LoadPlugin="tooltips" + +# Plugin: DecodeUTFKeys +# Perl modules required: Encode and URI::Escape +# Allow AWStats to show correctly (in language charset) keywords/keyphrases +# strings even if they were UTF8 coded by the referer search engine. +# +#LoadPlugin="decodeutfkeys" + +# Plugin: IPv6 +# Perl modules required: Net::IP and Net::DNS +# This plugin gives AWStats capability to make reverse DNS lookup on IPv6 +# addresses. +# Note: If you are interested in having country report, you should use the +# geoipfree or geoip plugin instead of enabled reverse DNS lookup. +# +LoadPlugin="ipv6" + +# Plugin: HashFiles +# Perl modules required: Storable +# AWStats DNS cache files are read/saved as native hash files. This increases +# DNS cache files loading speed, above all for very large web sites. +# +#LoadPlugin="hashfiles" + +# Plugin: GeoIP +# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind) +# Country chart is built from an Internet IP-Country database. +# This plugin is useless for intranet only log files. +# Note: You must choose between using this plugin (need Perl Geo::IP module +# from Maxmind, database more up to date) or the GeoIPfree plugin (need +# Perl Geo::IPfree module, database less up to date). +# This plugin reduces AWStats speed of 8% ! +# +#LoadPlugin="geoip GEOIP_STANDARD /pathto/GeoIP.dat" + +# Plugin: GeoIPfree +# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.) +# Country chart is built from an Internet IP-Country database. +# This plugin is useless for intranet only log files. +# Note: You must choose between using this plugin (need Perl Geo::IPfree +# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP +# module from Maxmind, database more up to date). +# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl +# module, so install it from elsewhere (from www.cpan.org for example). +# This plugin reduces AWStats speed of 10% ! +# +#LoadPlugin="geoipfree" + +# Plugin: GeoIP_Region_Maxmind +# Perl modules required: Geo::IP (from Maxmind) +# This plugin add a chart of hits by regions. Only regions for US and +# Canada can be detected. +# Note: This plugin need Maxmind GeoIP Perl module AND the region database. +# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState +# on Windows but it works great on Linux with default Perl. +# You need to purchase a license from Maxmind to get/use the Region database. +# This plugin reduces AWStats speed. +# +#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat" + +# Plugin: GeoIP_City_Maxmind +# Perl modules required: Geo::IP (from Maxmind) +# This plugin add a chart of hits by cities (with country and regions +# informations for major countries). +# Note: This plugin need Maxmind GeoIP Perl module AND the city database. +# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState +# on Windows but it works great on Linux with default Perl. +# You need to purchase a license from Maxmind to get/use the City database. +# This plugin reduces AWStats speed. +# +#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat" + +# Plugin: GeoIP_ISP_Maxmind +# Perl modules required: Geo::IP (from Maxmind) +# This plugin add a chart of hits by ISP. +# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database. +# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState +# on Windows but it works great on Linux with default Perl. +# You need to purchase a license from Maxmind to get/use the ISP database. +# This plugin reduces AWStats speed. +# +#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat" + +# Plugin: GeoIP_Org_Maxmind +# Perl modules required: Geo::IP (from Maxmind) +# This plugin add a chart of hits by Organization name +# Note: This plugin need Maxmind GeoIP Perl module AND the Org database. +# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState +# on Windows but it works great on Linux with default Perl. +# You need to purchase a license from Maxmind to get/use the Org database. +# This plugin reduces AWStats speed. +# +#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat" + +# Plugin: UserInfo +# Perl modules required: None +# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user +# reports for each login value. +# A text file called userinfo.myconfig.txt, with two fields (first is login, +# second is text to show, separated by a tab char) must be created in DirData +# directory. +# +#LoadPlugin="userinfo" + +# Plugin: HostInfo +# Perl modules required: Net::XWhois +# Add a column into host chart with a link to open a popup window that shows +# info on host (like whois records). +# +#LoadPlugin="hostinfo" + +# Plugin: ClusterInfo +# Perl modules required: None +# Add a text (for example a full hostname) in cluster reports for each cluster +# number. +# A text file called clusterinfo.myconfig.txt, with two fields (first is +# cluster number, second is text to show) separated by a tab char. must be +# created into DirData directory. +# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't +# use a personalized log format that contains %cluster tag. +# +#LoadPlugin="clusterinfo" + +# Plugin: UrlAliases +# Perl modules required: None +# Add a text (Page title, description...) in URL reports before URL value. +# A text file called urlalias.myconfig.txt, with two fields (first is URL, +# second is text to show, separated by a tab char) must be created into +# DirData directory. +# +#LoadPlugin="urlalias" + +# Plugin: TimeHiRes +# Perl modules required: Time::HiRes (if Perl < 5.8) +# Time reported by -showsteps option is in millisecond. For debug purpose. +# +#LoadPlugin="timehires" + +# Plugin: TimeZone +# Perl modules required: Time::Local +# Allow AWStats to correct a bad timezone for user of some IIS that use +# GMT date in its log instead of local server time. +# This module is useless for Apache and most IIS version. +# This plugin reduces AWStats speed of 40% !!!!!!! +# +#LoadPlugin="timezone +2" + +# Plugin: Rawlog +# Perl modules required: None +# This plugin adds a form in AWStats main page to allow users to see raw +# content of current log files. A filter is also available. +# +#LoadPlugin="rawlog" + +# Plugin: GraphApplet +# Perl modules required: None +# Supported charts are built by a 3D graphic applet. +# +#LoadPlugin="graphapplet /awstatsclasses" # EXPERIMENTAL FEATURE + + + +#----------------------------------------------------------------------------- +# EXTRA SECTIONS +#----------------------------------------------------------------------------- + +# You can define your own charts, you choose here what are rows and columns +# keys. This feature is particularly useful for marketing purpose, tracking +# products orders for example. +# For this, edit all parameters of Extra section. Each set of parameter is a +# different chart. For several charts, duplicate section changing the number. +# Note: Each Extra section reduces AWStats speed by 8%. +# +# WARNING: A wrong setup of Extra section might result in too large arrays +# that will consume all your memory, making AWStats unusable after several +# updates, so be sure to setup it correctly. +# In most cases, you don't need this feature. +# +# ExtraSectionNameX is title of your personalized chart. +# ExtraSectionCodeFilterX is list of codes the record code field must match. +# Put an empty string for no test on code. +# ExtraSectionConditionX are conditions you can use to count or not the hit, +# Use one of the field condition +# (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX) +# and a regex to match, after a coma. Use "||" for "OR". +# ExtraSectionFirstColumnTitleX is the first column title of the chart. +# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to +# extract value from +# (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX) +# and how to extract the value (using regex syntax). Each different value +# found will appear in first column of report on a different row. Be sure +# that list of different possible values will not grow indefinitely. +# ExtraSectionFirstColumnFormatX is the string used to write value. +# ExtraSectionStatTypesX are things you want to count. You can use standard +# code letters (P for pages,H for hits,B for bandwidth,L for last access). +# ExtraSectionAddAverageRowX add a row at bottom of chart with average values. +# ExtraSectionAddSumRowX add a row at bottom of chart with sum values. +# MaxNbOfExtraX is maximum number of rows shown in chart. +# MinHitExtraX is minimum number of hits required to be shown in chart. +# + +# Example to report the 20 products the most ordered by "order.cgi" script +#ExtraSectionName1="Product orders" +#ExtraSectionCodeFilter1="200 304" +#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi" +#ExtraSectionFirstColumnTitle1="Product ID" +#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)" +#ExtraSectionFirstColumnFormat1="%s" +#ExtraSectionStatTypes1=PL +#ExtraSectionAddAverageRow1=0 +#ExtraSectionAddSumRow1=1 +#MaxNbOfExtra1=20 +#MinHitExtra1=1 + + +# There is also a global parameter ExtraTrackedRowsLimit that limits the +# number of possible rows an ExtraSection can report. This parameter is +# here to protect too much memory use when you make a bad setup in your +# ExtraSection. It applies to all ExtraSection independently meaning that +# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit. +# If you know an ExtraSection will report more rows than its value, you should +# increase this parameter or AWStats will stop with an error. +# Example: 2000 +# Default: 500 +# +ExtraTrackedRowsLimit=500 + + +#----------------------------------------------------------------------------- +# INCLUDES +#----------------------------------------------------------------------------- + +# You can include other config files using the directive with the name of the +# config file. +# This is particularly useful for users who have a lot of virtual servers, so +# a lot of config files and want to maintain common values in only one file. +# Note that when a variable is defined both in a config file and in an +# included file, AWStats will use the last value read for parameters that +# contains one value and AWStats will concat all values from both files for +# parameters that are lists of values. +# + +#Include "" +
