File smartmontools.spec of Package smartmontools

File smartmontools.spec of Package smartmontools (Revision 413e765e079e7517c223d2d945761d36)

Currently displaying revision 413e765e079e7517c223d2d945761d36, show latest

#
# spec file for package smartmontools (Version 5.38)
#

# norootforbuild

Name:           smartmontools
License:        GPL v2 or later
Group:          Hardware/Other
Version:        5.38.99
Release:        1
#Source:         %{name}-%{version}.tar.bz2
Source:         sm5-svn20090801.tar.bz2
Source1:        README.SATA
Patch:          smartmontools-powersave-notify.patch
Patch1:		smartmontools-stresslinux-init-script.patch
PreReq:         %insserv_prereq %fillup_prereq coreutils
%if 0%{?suse_version} > 1000
Requires:       powersave
%endif
%if 0%{?suse_version} > 1020
Requires:       licenses
BuildRequires:  licenses
%endif
%if 0%{?suse_version} < 1000
BuildRequires:  kernel-source
%endif
Url:            http://smartmontools.sourceforge.net/
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
BuildRequires:  gcc-c++ libstdc++-devel
Summary:        Monitor for S.M.A.R.T. Disks and Devices
Obsoletes:      smartctl smartd ucsc-smartsuite smartsuite

%description
SMARTmontools controls and monitors storage devices using the
Self-Monitoring, Analysis, and Reporting Technology System (S.M.A.R.T.)
built into ATA, SATA and SCSI Hard Drives. This is used to check the
hard drive reliability and to predict drive failures. The suite
contains two utilities. The first, smartctl, is a command line utility
designed to perform simple S.M.A.R.T. tasks. The second, smartd, is a
daemon that periodically monitors the smart status and reports errors
to syslog. The package is compatible with the ATA/ATAPI-3 to -7
specification. The package is intended to incorporate as much "vendor
specific" and "reserved" information as possible about disk drives. The
commands man smartctl and man smartd will provide more information.

Authors:
--------
    Bruce Allen <smartmontools-support@lists.sourceforge.net>

%prep
%setup -q -n sm5
cp -a %{S:1} .
%if 0%{?suse_version} > 1000
%patch
%endif
%patch1

%build
./autogen.sh
%if 0%{?suse_version} >= 1000
export CFLAGS="$RPM_OPT_FLAGS -fPIE"
export CXXFLAGS="$RPM_OPT_FLAGS -fPIE"
export LDFLAGS="-pie"
%else
# glibc header linux/cciss_ioctl.h is broken and outdated in SLES9 (#302136). Let's use the one from kernel:
export CPPFLAGS=-I/usr/src/linux/include
%endif
%configure\
	--with-docdir=%{_defaultdocdir}/%{name}
make %{?jobs:-j%jobs}

%install
%makeinstall
mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/init.d
cp smartd.initd $RPM_BUILD_ROOT%{_sysconfdir}/init.d/smartd
chmod +x $RPM_BUILD_ROOT%{_sysconfdir}/init.d/smartd
ln -s ../..%{_sysconfdir}/init.d/smartd $RPM_BUILD_ROOT%{_sbindir}/rcsmartd
%if 0%{?suse_version} > 1000
mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib/smartmontools
cp examplescripts/Example4 $RPM_BUILD_ROOT%{_prefix}/lib/smartmontools/smart-notify
chmod +x $RPM_BUILD_ROOT%{_prefix}/lib/smartmontools/smart-notify
%endif
mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/default
echo '#smartd_opts=""' >$RPM_BUILD_ROOT%{_sysconfdir}/default/smartmontools
%if 0%{?suse_version} < 1010
cp README.SATA $RPM_BUILD_ROOT%{_datadir}/doc/packages/%{name}/
%endif
#remove installed files we don't want to package
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/
%if 0%{?suse_version} > 1020
ln -sf %{_datadir}/doc/licenses/md5/$(md5sum COPYING | sed 's/ .*//') $RPM_BUILD_ROOT%{_docdir}/%{name}/COPYING
%endif

%clean
rm -rf $RPM_BUILD_ROOT

%pre
# Older SuSE versions (<=10.2) don't do restart on update. Test it and set flag.
# This file exists since smartmontools-5.37:
if ! test -f usr/share/doc/packages/smartmontools/examplescripts/Example4 ; then
    touch var/adm/smartd_needs_restart
fi

%post
%if 0%{?suse_version} < 1010
# With some broken drivers in older kernels, smartd can hang the system.
# Don't start it by default.
%{fillup_and_insserv -f smartd}
%else
# Turn smartd on by default.
%{fillup_and_insserv -f -Y smartd}
%endif
# Older SuSE versions (<=10.2) don't do restart on update. Do it now.
if test -f var/adm/smartd_needs_restart ; then
rm var/adm/smartd_needs_restart
%{restart_on_update smartd}
fi

%preun
%{stop_on_removal smartd}

%postun
%{restart_on_update smartd}
%{insserv_cleanup}

%files
%defattr(-, root, root)
%doc %{_docdir}/%{name}
%doc %{_mandir}/man*/*
%if 0%{?suse_version} > 1000
%{_prefix}/lib/smartmontools
%endif
%{_sbindir}/*
%config(noreplace) %{_sysconfdir}/default/*
%{_sysconfdir}/init.d/*
%config(noreplace) %{_sysconfdir}/*.conf

%changelog
* Sat Aug 01 2009 Carsten Schoene <cs@linux-administrator.com> - 5.38.99-1
- update to svn snapshot 2009-01-08
- added patch to support stresslinux in init script

* Sat Jul 05 2008 Carsten Schoene <cs@linux-administrator.com>
- update to smartmontools 5.38
- removed two patches