File lm_sensors-3.0.0.dif of Package sensors - j0ke.net Open Build Service

File lm_sensors-3.0.0.dif of Package sensors (Revision efba2e3964e8c3c4ebf9e79c0c381eb6)

Currently displaying revision efba2e3964e8c3c4ebf9e79c0c381eb6, show latest

Index: Makefile
===================================================================
--- Makefile.orig
+++ Makefile
@@ -38,7 +38,7 @@ DEBUG := 0
 DESTDIR :=
 
 # This is the prefix that will be used for almost all directories below.
-PREFIX := /usr/local
+PREFIX := /usr
 
 # Your C compiler
 CC := gcc
@@ -71,7 +71,7 @@ LIBINCLUDEDIR := $(INCLUDEDIR)/sensors
 
 # You should not need to change this. It is the base directory under which the
 # manual pages will be installed.
-MANDIR := $(PREFIX)/man
+MANDIR := $(PREFIX)/share/man
 
 MACHINE := $(shell uname -m)
 
@@ -133,7 +133,7 @@ ifeq ($(DEBUG),1)
 ALL_CPPFLAGS += -DDEBUG
 ALL_CFLAGS += -O -g
 else
-ALL_CFLAGS += -O2
+ALL_CFLAGS += $(RPM_OPT_FLAGS)
 endif
 
 ifeq ($(WARN),1)
Index: prog/detect/sensors-detect
===================================================================
--- prog/detect/sensors-detect.orig
+++ prog/detect/sensors-detect
@@ -5945,6 +5945,8 @@ EOT
     print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n".
           "for initialization at boot time.\n"
       unless -f "/etc/init.d/lm_sensors";
+    system("/sbin/insserv", "/etc/init.d/lm_sensors")
+      if -f "/etc/init.d/lm_sensors";
   }
 }
 
Index: prog/init/README
===================================================================
--- prog/init/README.orig
+++ prog/init/README
@@ -10,7 +10,7 @@ The script lm_sensors.init is a nice sta
 On RH and other RH-based systems (MDK, notably) use this sort of startup
 mechanism (i.e. SVR4-based), as opposed to the everything-in-one-script
 (/etc/rc or /etc/rc.local) like the BSD-based systems do.
-The lm_sensors.init file should be copied to /etc/rc.d/init.d/lm_sensors.
+The lm_sensors.init file should be copied to /etc/init.d/lm_sensors.
 For more information see the top of the file.
 It requires the /etc/sysconfig/lm_sensors file, which identifies
 the correct modules.
@@ -27,10 +27,10 @@ by Marc Rieffel <marc@paracel.com>.
 ----------------
 
 The script sensord.init also loads the modules, and then
-starts the sensord daemon. See the directory ../sensord for
+starts the sensord daemon. See the manual page sensord(8) for
 more information on the daemon.
 
-The sensord.init file should be copied to /etc/rc.d/init.d/sensord.
+The sensord.init file should be copied to /etc/init.d/sensord.
 For more information see the top of the file.
 
 To configure this service one should put appropriate "alias i2c-bus-0 xxx"
Index: prog/init/lm_sensors.init.suse
===================================================================
--- prog/init/lm_sensors.init.suse.orig
+++ prog/init/lm_sensors.init.suse
@@ -1,19 +1,15 @@
 #!/bin/sh
 #
 ### BEGIN INIT INFO
-# Provides:			lm_sensors
-# Required-Start:		$local_fs 
-# X-UnitedLinux-Should-Start:	
-# Required-Stop:		$local_fs 
-# X-UnitedLinux-Should-Stop:	
-# Default-Start:		3 4 5
-# Default-Stop:			0 1 2 6
-# Short-Description:		LM Sensors
-# Description:			LM Sensors for hardware monitoring
+# Provides:       sensors
+# Required-Start: $remote_fs
+# Required-Stop:  $remote_fs
+# Default-Start:  2 3 5
+# Default-Stop:
+# Short-Description: Load and configure hardware monitoring drivers
+# Description:    sensors is used for monitoring motherboard sensor values.
+#                 Config file is /etc/sysconfig/lm_sensors
 ### END INIT INFO
-# chkconfig: 2345 26 74
-# description: sensors is used for monitoring motherboard sensor values.
-# config: /etc/sysconfig/lm_sensors
 #
 #    This program is free software; you can redistribute it and/or modify
 #    it under the terms of the GNU General Public License as published by
@@ -40,115 +36,91 @@
 #    MODULE_1, MODULE_2, MODULE_3, etc.
 
 # If sensors isn't supported by the kernel, try loading the module...
-[ -e /proc/sys/dev/sensors ] || /sbin/modprobe i2c-proc &>/dev/null
+[ -e /sys/bus/i2c/devices ] || /sbin/modprobe i2c-dev &>/dev/null
 
 # Don't bother if /proc/sensors still doesn't exist, kernel doesn't have
 # support for sensors.
-[ -e /proc/sys/dev/sensors ] || exit 0
-
+[ -e /sys/bus/i2c/devices ] || exit 0
+  
 # If sensors was not already running, unload the module...
-[ -e /var/lock/subsys/lm_sensors ] || /sbin/modprobe -r i2c-proc &>/dev/null
+[ -e /var/lock/subsys/sensors ] || /sbin/modprobe -r i2c-dev &>/dev/null
 
 CONFIG=/etc/sysconfig/lm_sensors
-PSENSORS=/usr/local/bin/sensors
+PSENSORS=/usr/bin/sensors
+FANCONFIG=/etc/fancontrol
+PFAN=/usr/sbin/fancontrol
 
 # Source function library.
-#. /etc/init.d/functions
-
-# Shell functions sourced from /etc/rc.status:
-#      rc_check         check and set local and overall rc status
-#      rc_status        check and set local and overall rc status
-#      rc_status -v     ditto but be verbose in local rc status
-#      rc_status -v -r  ditto and clear the local rc status
-#      rc_status -s     display "skipped" and exit with status 3
-#      rc_status -u     display "unused" and exit with status 3
-#      rc_failed        set local and overall rc status to failed
-#      rc_failed <num>  set local and overall rc status to <num>
-#      rc_reset         clear local rc status (overall remains)
-#      rc_exit          exit appropriate to overall rc status
-#      rc_active	checks whether a service is activated by symlinks
-#      rc_splash arg    sets the boot splash screen to arg (if active)
 . /etc/rc.status
 
-# Reset status of this service
-rc_reset
-
-# Return values acc. to LSB for all commands but status:
-# 0	  - success
-# 1       - generic or unspecified error
-# 2       - invalid or excess argument(s)
-# 3       - unimplemented feature (e.g. "reload")
-# 4       - user had insufficient privileges
-# 5       - program is not installed
-# 6       - program is not configured
-# 7       - program is not running
-# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
-# 
-# Note that starting an already running service, stopping
-# or restarting a not-running service as well as the restart
-# with force-reload (in case signaling is not supported) are
-# considered a success.
-
-RETVAL=0
-
 start() {
-	echo -n $"Starting up sensors: "
+	echo -n "Starting up sensors"
+	unset ${!MODULE_*}
 	test -r "$CONFIG" && . "$CONFIG"
 
-        modules=`grep \^MODULE_ $CONFIG | wc -l | tr -d ' '`
-        i=0
-        while [ $i -lt $modules ] ; do
-                module=`eval echo '$'MODULE_$i`
-		echo starting module __${module}__
+	for i in ${!MODULE_*} ; do
+		eval module=\$$i
 		/sbin/modprobe $module &>/dev/null
-		i=`expr $i + 1`
+		rc_status
 	done
-        $PSENSORS -s
+	rc_status
 
-	RETVAL=$?
-	if [ $RETVAL -eq 0 ] && touch /var/lock/subsys/lm_sensors ; then
-	    rc_status -v
+	/usr/bin/sensors -s &> /dev/null
+	rc_status
+
+	# Start fan control, if configured
+	if test -s "$FANCONFIG" -a -x "$PFAN" ; then
+	    echo -n ", starting fan control: "
+	    /sbin/startproc -q "$PFAN"
+	    rc_status
 	else
-	    rc_status -v
+	    echo -n ": "
 	fi
+
+	rc_status -v && touch /var/lock/subsys/sensors
 }
 
 stop() {
-	echo -n $"Shutting down sensors: "
+	echo -n "Shutting down sensors"
+	unset ${!MODULE_*}
 	test -r "$CONFIG" && . "$CONFIG"
 
-        modules=`grep \^MODULE_ $CONFIG | wc -l | tr -d ' '`
-        i=`expr $modules`
-        while [ $i -ge 0 ] ; do
-                module=`eval echo '$'MODULE_$i`
+	# Stop fan control, if it was started
+	if test -s /var/run/fancontrol.pid ; then
+	    echo -n ", stopping fan control: "
+	    /sbin/killproc -TERM "$PFAN"
+	    rc_status
+	else
+	    echo -n ": "
+	fi
+
+	for i in ${!MODULE_*} ; do
+		eval module=\$$i
 		/sbin/modprobe -r $module &>/dev/null
-		i=`expr $i - 1`
+		rc_status
 	done
-	/sbin/modprobe -r i2c-proc &>/dev/null
 
-	RETVAL=$?
-	if [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/lm_sensors ; then
-	    rc_status -v
-	else
-	    rc_status -v
-	fi
+	rc_status -v && rm -f /var/lock/subsys/sensors
 }
 
 dostatus() {
-        $PSENSORS
-	RETVAL=$?
+	$PSENSORS
+	rc_status
 }
 
 restart() {
 	stop
 	start
-	RETVAL=$?
+	rc_status
 }
 
 condrestart() {
 	[ -e /var/lock/subsys/lm_sensors ] && restart || :
 }
 
+# Reset status of this service
+rc_reset
+
 # See how we were called.
 case "$1" in
   start)
@@ -163,12 +135,12 @@ case "$1" in
   restart|reload)
 	restart
 	;;
-  condrestart)
+  try-restart)
 	condrestart
 	;;
   *)
-	echo "Usage: sensors.init {start|stop|status|restart|reload|condrestart}"
+	echo "Usage: lm_sensors {start|stop|status|restart|reload|try-restart}"
 	exit 1
 esac
 
-exit $RETVAL
+rc_exit