File fix-overflows.diff of Package memtest86+

File fix-overflows.diff of Package memtest86+ (Revision 3da8a4496ff11148b986bbd6099acc91)

Currently displaying revision 3da8a4496ff11148b986bbd6099acc91, show latest

diff -urp memtest86+-2.01.mm/io.h memtest86+-2.01/io.h
--- memtest86+-2.01.mm/io.h	2008-02-21 12:26:05.000000000 +0100
+++ memtest86+-2.01/io.h	2008-04-30 12:32:34.787275000 +0200
@@ -31,7 +31,7 @@
  */
 
 #define __OUT1(s,x) \
-extern inline void __out##s(unsigned x value, unsigned short port) {
+static inline void __out##s(unsigned x value, unsigned short port) {
 
 #define __OUT2(s,s1,s2) \
 __asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
@@ -43,7 +43,7 @@ __OUT1(s##_p,x) __OUT2(s,s1,"w") : : "a"
 __OUT1(s##c_p,x) __OUT2(s,s1,"") : : "a" (value), "id" (port)); SLOW_DOWN_IO; }
 
 #define __IN1(s) \
-extern inline RETURN_TYPE __in##s(unsigned short port) { RETURN_TYPE _v;
+static inline RETURN_TYPE __in##s(unsigned short port) { RETURN_TYPE _v;
 
 #define __IN2(s,s1,s2) \
 __asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
@@ -55,7 +55,7 @@ __IN1(s##_p) __IN2(s,s1,"w") : "=a" (_v)
 __IN1(s##c_p) __IN2(s,s1,"") : "=a" (_v) : "id" (port) ,##i ); SLOW_DOWN_IO; return _v; }
 
 #define __OUTS(s) \
-extern inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
+static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
 { __asm__ __volatile__ ("cld ; rep ; outs" #s \
 : "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
 
diff -urp memtest86+-2.01.mm/test.c memtest86+-2.01/test.c
--- memtest86+-2.01.mm/test.c	2008-02-21 12:26:05.000000000 +0100
+++ memtest86+-2.01/test.c	2008-04-30 14:15:56.666389000 +0200
@@ -25,6 +25,22 @@ void poll_errors();
 
 int ecount = 0;
 
+static inline volatile ulong * sat_add(volatile ulong *ptr, ulong i, volatile ulong *end)
+{
+  if ((ulong)ptr + i * sizeof(*ptr) > (ulong)ptr)
+    return ptr + i;
+  else
+    return end;
+}
+
+static inline volatile ulong * sat_sub(volatile ulong *ptr, ulong i, volatile ulong *start)
+{
+  if ((ulong)ptr > i * sizeof(*ptr))
+    return ptr - i;
+  else
+    return start;
+}
+
 static inline ulong roundup(ulong value, ulong mask)
 {
 	return (value + mask) & ~mask;
@@ -150,11 +166,7 @@ void addr_tst2()
 		done = 0;
 		do {
 			/* Check for overflow */
-			if (pe + SPINSZ > pe) {
-				pe += SPINSZ;
-			} else {
-				pe = end;
-			}
+			pe = sat_add(pe, SPINSZ, end);
 			if (pe >= end) {
 				pe = end;
 				done++;
@@ -194,11 +206,7 @@ void addr_tst2()
 		done = 0;
 		do {
 			/* Check for overflow */
-			if (pe + SPINSZ > pe) {
-				pe += SPINSZ;
-			} else {
-				pe = end;
-			}
+			pe = sat_add(pe, SPINSZ, end);
 			if (pe >= end) {
 				pe = end;
 				done++;
@@ -280,11 +288,7 @@ void movinvr()
 		done = 0;
 		do {
 			/* Check for overflow */
-			if (pe + SPINSZ > pe) {
-				pe += SPINSZ;
-			} else {
-				pe = end;
-			}
+			pe = sat_add(pe, SPINSZ, end);
 			if (pe >= end) {
 				pe = end;
 				done++;
@@ -331,11 +335,7 @@ void movinvr()
 			done = 0;
 			do {
 				/* Check for overflow */
-				if (pe + SPINSZ > pe) {
-					pe += SPINSZ;
-				} else {
-					pe = end;
-				}
+				pe = sat_add(pe, SPINSZ, end);
 				if (pe >= end) {
 					pe = end;
 					done++;
@@ -419,7 +419,8 @@ void movinv1(int iter, ulong p1, ulong p
 	hprint(LINE_PAT, COL_PAT, p1);
 
 	/* Initialize memory with the initial pattern.  */
-	for (j=0; j<segs; j++) {
+	for (j=0; j<segs; j++)
+	{
 		start = v->map[j].start;
 		end = v->map[j].end;
 		pe = start;
@@ -427,11 +428,7 @@ void movinv1(int iter, ulong p1, ulong p
 		done = 0;
 		do {
 			/* Check for overflow */
-			if (pe + SPINSZ > pe) {
-				pe += SPINSZ;
-			} else {
-				pe = end;
-			}
+			pe = sat_add(pe, SPINSZ, end);
 			if (pe >= end) {
 				pe = end;
 				done++;
@@ -440,17 +437,19 @@ void movinv1(int iter, ulong p1, ulong p
 			if (p == pe ) {
 				break;
 			}
-/* Original C code replaced with hand tuned assembly code
- *			for (; p < pe; p++) {
- *				*p = p1;
- *			}
- */
+/* Original C code replaced with hand tuned assembly code */
+#if 0
+  			for (; p < pe; p++) {
+  				*p = p1;
+  			}
+#else
 			asm __volatile__ (
 				"rep\n\t" \
 				"stosl\n\t"
 				: "=D" (p)
 				: "c" (len), "0" (p), "a" (p1)
 			);
+#endif
 			do_tick();
 			BAILR
 		} while (!done);
@@ -460,7 +459,8 @@ void movinv1(int iter, ulong p1, ulong p
 	 * write the complement for each memory location. Test from bottom
 	 * up and then from the top down.  */
 	for (i=0; i<iter; i++) {
-		for (j=0; j<segs; j++) {
+		for (j=0; j<segs; j++)
+		{
 			start = v->map[j].start;
 			end = v->map[j].end;
 			pe = start;
@@ -468,11 +468,7 @@ void movinv1(int iter, ulong p1, ulong p
 			done = 0;
 			do {
 				/* Check for overflow */
-				if (pe + SPINSZ > pe) {
-					pe += SPINSZ;
-				} else {
-					pe = end;
-				}
+				pe = sat_add(pe, SPINSZ, end);
 				if (pe >= end) {
 					pe = end;
 					done++;
@@ -480,14 +476,16 @@ void movinv1(int iter, ulong p1, ulong p
 				if (p == pe ) {
 					break;
 				}
-/* Original C code replaced with hand tuned assembly code
- *				for (; p < pe; p++) {
- *					if ((bad=*p) != p1) {
- *						error((ulong*)p, p1, bad);
- *					}
- *					*p = p2;
- *				}
- */
+/* Original C code replaced with hand tuned assembly code */
+#if 0
+  				for (; p < pe; p++) {
+					ulong bad;
+  					if ((bad=*p) != p1) {
+  						error((ulong*)p, p1, bad);
+  					}
+  					*p = p2;
+  				}
+#else 
 				asm __volatile__ (
 					"jmp L2\n\t" \
 
@@ -522,10 +520,12 @@ void movinv1(int iter, ulong p1, ulong p
 					: "a" (p1), "0" (p), "d" (pe), "b" (p2)
 					: "ecx"
 				);
+#endif
 				do_tick();
 				BAILR
 			} while (!done);
 		}
+
 		for (j=segs-1; j>=0; j--) {
 			start = v->map[j].start;
 			end = v->map[j].end;
@@ -534,11 +534,7 @@ void movinv1(int iter, ulong p1, ulong p
 			done = 0;
 			do {
 				/* Check for underflow */
-				if (pe - SPINSZ < pe) {
-					pe -= SPINSZ;
-				} else {
-					pe = start;
-				}
+				pe = sat_sub(pe, SPINSZ, start);
 				if (pe <= start) {
 					pe = start;
 					done++;
@@ -546,14 +542,16 @@ void movinv1(int iter, ulong p1, ulong p
 				if (p == pe ) {
 					break;
 				}
-/* Original C code replaced with hand tuned assembly code
- *				do {
- *					if ((bad=*p) != p2) {
- *						error((ulong*)p, p2, bad);
- *					}
- *					*p = p1;
- *				} while (p-- > pe);
- */
+/* Original C code replaced with hand tuned assembly code */
+#if 0
+  				do {
+					ulong bad;
+  					if ((bad=*p) != p2) {
+  						error((ulong*)p, p2, bad);
+  					}
+  					*p = p1;
+  				} while (p-- > pe);
+#else 
 				asm __volatile__ (
 					"addl $4, %%edi\n\t"
 					"jmp L9\n\t"
@@ -590,6 +588,7 @@ void movinv1(int iter, ulong p1, ulong p
 					: "a" (p1), "0" (p), "d" (pe), "b" (p2)
 					: "ecx"
 				);
+#endif
 				do_tick();
 				BAILR
 			} while (!done);
@@ -623,11 +622,7 @@ void movinv32(int iter, ulong p1, ulong 
 		pat = p1;
 		do {
 			/* Check for overflow */
-			if (pe + SPINSZ > pe) {
-				pe += SPINSZ;
-			} else {
-				pe = end;
-			}
+			pe = sat_add(pe, SPINSZ, end);
 			if (pe >= end) {
 				pe = end;
 				done++;
@@ -685,11 +680,7 @@ void movinv32(int iter, ulong p1, ulong 
 			pat = p1;
 			do {
 				/* Check for overflow */
-				if (pe + SPINSZ > pe) {
-					pe += SPINSZ;
-				} else {
-					pe = end;
-				}
+				pe = sat_add(pe, SPINSZ, end);
 				if (pe >= end) {
 					pe = end;
 					done++;
@@ -798,11 +789,7 @@ void movinv32(int iter, ulong p1, ulong 
 			done = 0;
 			do {
 				/* Check for underflow */
-				if (pe - SPINSZ < pe) {
-					pe -= SPINSZ;
-				} else {
-					pe = start;
-				}
+				pe = sat_sub(pe, SPINSZ, start);
 				if (pe <= start) {
 					pe = start;
 					done++;
@@ -906,11 +893,7 @@ void modtst(int offset, int iter, ulong 
 		done = 0;
 		do {
 			/* Check for overflow */
-			if (pe + SPINSZ > pe) {
-				pe += SPINSZ;
-			} else {
-				pe = end;
-			}
+			pe = sat_add(pe, SPINSZ, end);
 			if (pe >= end) {
 				pe = end;
 				done++;
@@ -951,11 +934,7 @@ void modtst(int offset, int iter, ulong 
 			k = 0;
 			do {
 				/* Check for overflow */
-				if (pe + SPINSZ > pe) {
-					pe += SPINSZ;
-				} else {
-					pe = end;
-				}
+				pe = sat_add(pe, SPINSZ, end);
 				if (pe >= end) {
 					pe = end;
 					done++;
@@ -1009,11 +988,7 @@ void modtst(int offset, int iter, ulong 
 		done = 0;
 		do {
 			/* Check for overflow */
-			if (pe + SPINSZ > pe) {
-				pe += SPINSZ;
-			} else {
-				pe = end;
-			}
+			pe = sat_add(pe, SPINSZ, end);
 			if (pe >= end) {
 				pe = end;
 				done++;