File iperf.init of Package iperf - j0ke.net Open Build Service

File iperf.init of Package iperf (Revision 5630eeaaa3eba73cb7f1f9aed535155c)

Currently displaying revision 5630eeaaa3eba73cb7f1f9aed535155c, show latest

#! /bin/sh
#
# /etc/init.d/iperf
#   and its symbolic link
# /usr/sbin/rciperf
#
# LSB compatible service control script; see http://www.linuxbase.org/spec/
#
### BEGIN INIT INFO
# Provides:          iperf
# Required-Start:    $remote_fs
# Required-Stop:     $remote_fs
# Default-Start:     3 5
# Default-Stop:      0 1 2 6
# Description:       Iperf bandwidth testing daemon
### END INIT INFO

IPERF_BIN=/usr/bin/iperf
test -x $IPERF_BIN || exit 5

IPERF_SYSCONFIG=/etc/sysconfig/iperf
test -r $IPERF_SYSCONFIG || exit 6
. $IPERF_SYSCONFIG

. /etc/rc.status

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     ditto but be verbose in local rc status
#      rc_status -v -r  ditto and clear the local rc status
#      rc_failed        set local and overall rc status to failed
#      rc_reset         clear local rc status (overall remains)
#      rc_exit          exit appropriate to overall rc status

# First reset status of this service
rc_reset

case "$1" in
    start)
	echo -n "Starting iperf "
	/sbin/startproc $IPERF_BIN -sD $IPERF_OPTIONS

# Remember status and be verbose
	rc_status -v
	;;
    stop)
	echo -n "Shutting down iperf "
	/sbin/killproc -TERM $IPERF_BIN

# Remember status and be verbose
	rc_status -v
	;;
    try-restart|condrestart)
        ## Stop the service and if this succeeds (i.e. the 
        ## service was running before), start it again.
	if test "$1" = "condrestart"; then
            echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
        fi

$0 status >/dev/null &&  $0 restart

# Remember status and be quiet
        rc_status
        ;;
    restart)
        ## Stop the service and regardless of whether it was
        ## running or not, start it again.
        $0 stop
	sleep 3
        $0 start

# Remember status and be quiet
        rc_status
        ;;
    force-reload)
	## Signal the daemon to reload its config. Most daemons
	## do this on signal 1 (SIGHUP).

echo -n "Reload service iperf "	
	$0 try-restart

rc_status -v
        ;;
    reload)
        ## Like force-reload, but if daemon does not support
        ## signaling, do nothing (!)

rc_failed 3
        rc_status -v
        ;;
    status)
	echo -n "Checking for service iperf "
        ## Check status with checkproc(8), if process is running
        ## checkproc will return with exit status 0.

# Status has a slightly different for the status command:
        # 0 - service running
        # 1 - service dead, but /var/run/  pid  file exists
        # 2 - service dead, but /var/lock/ lock file exists
        # 3 - service not running

checkproc $IPERF_BIN

rc_status -v
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
	exit 1
	;;
esac
rc_exit