File clamav-etc-0.90.3.patch of Package clamav

--- etc/clamd.conf.orig	Fri Apr 20 21:20:26 2007
+++ etc/clamd.conf	Fri Apr 20 21:25:24 2007
@@ -1,351 +1,7 @@
-##
-## Example config file for the Clam AV daemon
-## Please read the clamd.conf(5) manual before editing this file.
-##
-
-
-# Comment or remove the line below.
-Example
-
-# Uncomment this option to enable logging.
-# LogFile must be writable for the user running daemon.
-# A full path is required.
-# Default: disabled
-#LogFile /tmp/clamd.log
-
-# By default the log file is locked for writing - the lock protects against
-# running clamd multiple times (if want to run another clamd, please
-# copy the configuration file, change the LogFile variable, and run
-# the daemon with --config-file option).
-# This option disables log file locking.
-# Default: no
-#LogFileUnlock yes
-
-# Maximum size of the log file.
-# Value of 0 disables the limit.
-# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
-# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
-# in bytes just don't use modifiers.
-# Default: 1M
-#LogFileMaxSize 2M
-
-# Log time with each message.
-# Default: no
-#LogTime yes
-
-# Also log clean files. Useful in debugging but drastically increases the
-# log size.
-# Default: no
-#LogClean yes
-
-# Use system logger (can work together with LogFile).
-# Default: no
-#LogSyslog yes
-
-# Specify the type of syslog messages - please refer to 'man syslog'
-# for facility names.
-# Default: LOG_LOCAL6
-#LogFacility LOG_MAIL
-
-# Enable verbose logging.
-# Default: no
-#LogVerbose yes
-
-# This option allows you to save a process identifier of the listening
-# daemon (main thread).
-# Default: disabled
-#PidFile /var/run/clamd.pid
-
-# Optional path to the global temporary directory.
-# Default: system specific (usually /tmp or /var/tmp).
-#TemporaryDirectory /var/tmp
-
-# Path to the database directory.
-# Default: hardcoded (depends on installation options)
-#DatabaseDirectory /var/lib/clamav
-
-# The daemon works in a local OR a network mode. Due to security reasons we
-# recommend the local mode.
-
-# Path to a local socket file the daemon will listen on.
-# Default: disabled (must be specified by a user)
-LocalSocket /tmp/clamd
-
-# Remove stale socket after unclean shutdown.
-# Default: no
-#FixStaleSocket yes
-
-# TCP port address.
-# Default: no
-#TCPSocket 3310
-
-# TCP address.
-# By default we bind to INADDR_ANY, probably not wise.
-# Enable the following to provide some degree of protection
-# from the outside world.
-# Default: no
-#TCPAddr 127.0.0.1
-
-# Maximum length the queue of pending connections may grow to.
-# Default: 15
-#MaxConnectionQueueLength 30
-
-# Clamd uses FTP-like protocol to receive data from remote clients.
-# If you are using clamav-milter to balance load between remote clamd daemons
-# on firewall servers you may need to tune the options below.
-
-# Close the connection when the data size limit is exceeded.
-# The value should match your MTA's limit for a maximum attachment size.
-# Default: 10M
-#StreamMaxLength 20M
-
-# Limit port range.
-# Default: 1024
-#StreamMinPort 30000
-# Default: 2048
-#StreamMaxPort 32000
-
-# Maximum number of threads running at the same time.
-# Default: 10
-#MaxThreads 20
-
-# Waiting for data from a client socket will timeout after this time (seconds).
-# Value of 0 disables the timeout.
-# Default: 120
-#ReadTimeout 300
-
-# Waiting for a new job will timeout after this time (seconds).
-# Default: 30
-#IdleTimeout 60
-
-# Maximum depth directories are scanned at.
-# Default: 15
-#MaxDirectoryRecursion 20
-
-# Follow directory symlinks.
-# Default: no
-#FollowDirectorySymlinks yes
-
-# Follow regular file symlinks.
-# Default: no
-#FollowFileSymlinks yes
-
-# Perform a database check.
-# Default: 1800 (30 min)
-#SelfCheck 600
-
-# Execute a command when virus is found. In the command string %v will
-# be replaced with the virus name.
-# Default: no
-#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"
-
-# Run as another user (clamd must be started by root to make this option
-# working).
-# Default: don't drop privileges
-#User clamav
-
-# Initialize supplementary group access (clamd must be started by root).
-# Default: no
-#AllowSupplementaryGroups no
-
-# Stop daemon when libclamav reports out of memory condition.
-#ExitOnOOM yes
-
-# Don't fork into background.
-# Default: no
-#Foreground yes
-
-# Enable debug messages in libclamav.
-# Default: no
-#Debug yes
-
-# Do not remove temporary files (for debug purposes).
-# Default: no
-#LeaveTemporaryFiles yes
-
-# In some cases (eg. complex malware, exploits in graphic files, and others),
-# ClamAV uses special algorithms to provide accurate detection. This option
-# controls the algorithmic detection.
-# Default: yes
-#AlgorithmicDetection yes
-
-##
-## Executable files
-##
-
-# PE stands for Portable Executable - it's an executable file format used
-# in all 32 and 64-bit versions of Windows operating systems. This option allows
-# ClamAV to perform a deeper analysis of executable files and it's also
-# required for decompression of popular executable packers such as UPX, FSG,
-# and Petite.
-# Default: yes
-#ScanPE yes
-
-# Executable and Linking Format is a standard format for UN*X executables.
-# This option allows you to control the scanning of ELF files.
-# Default: yes
-#ScanELF yes
-
-# With this option clamav will try to detect broken executables (both PE and
-# ELF) and mark them as Broken.Executable.
-# Default: no
-#DetectBrokenExecutables yes
-
-
-##
-## Documents
-##
-
-# This option enables scanning of OLE2 files, such as Microsoft Office
-# documents and .msi files.
-# Default: yes
-#ScanOLE2 yes
-
-# This option enables scanning within PDF files.
-# Default: no
-#ScanPDF yes
-
-##
-## Mail files
-##
-
-# Enable internal e-mail scanner.
-# Default: yes
-#ScanMail yes
-
-# If an email contains URLs ClamAV can download and scan them.
-# WARNING: This option may open your system to a DoS attack.
-#	   Never use it on loaded servers.
-# Default: no
-#MailFollowURLs no
-
-# Recursion level limit for the mail scanner.
-# Default: 64
-#MailMaxRecursion 128
-
-# With this option enabled ClamAV will try to detect phishing attempts by using
-# signatures.
-# Default: yes
-#PhishingSignatures yes
-
-
-# Scan urls found in mails for phishing attempts.
-# (available in experimental builds only) 
-# Default: yes
-#PhishingScanURLs yes
-
-# Use phishing detection only for domains listed in the .pdb database. It is
-# not recommended to have this option turned off, because scanning of all
-# domains may lead to many false positives!
-# (available in experimental builds only)
-# Default: yes
-#PhishingRestrictedScan yes
-
-# Always block SSL mismatches in URLs, even if the URL isn't in the database.
-# This can lead to false positives.
-# (available in experimental builds only)
-#
-# Default: no
-#PhishingAlwaysBlockSSLMismatch no
-
-# Always block cloaked URLs, even if URL isn't in database.
-# This can lead to false positives.
-# (available in experimental builds only)
-#
-# Default: no
-#PhishingAlwaysBlockCloak no
-
-##
-## HTML
-##
-
-# Perform HTML normalisation and decryption of MS Script Encoder code.
-# Default: yes
-#ScanHTML yes
-
-
-##
-## Archives
-##
-
-# ClamAV can scan within archives and compressed files.
-# Default: yes
-#ScanArchive yes
-
-# The options below protect your system against Denial of Service attacks
-# using archive bombs.
-
-# Files in archives larger than this limit won't be scanned.
-# Value of 0 disables the limit.
-# Default: 10M
-#ArchiveMaxFileSize 15M
-
-# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
-# file, all files within it will also be scanned. This options specifies how
-# deeply the process should be continued.
-# Value of 0 disables the limit.
-# Default: 8
-#ArchiveMaxRecursion 10
-
-# Number of files to be scanned within an archive.
-# Value of 0 disables the limit.
-# Default: 1000
-#ArchiveMaxFiles 1500
-
-# If a file in an archive is compressed more than ArchiveMaxCompressionRatio
-# times it will be marked as a virus (Oversized.ArchiveType, e.g. Oversized.Zip)
-# Value of 0 disables the limit.
-# Default: 250
-#ArchiveMaxCompressionRatio 300
-
-# Use slower but memory efficient decompression algorithm.
-# only affects the bzip2 decompressor.
-# Default: no
-#ArchiveLimitMemoryUsage yes
-
-# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
-# Default: no
-#ArchiveBlockEncrypted no
-
-# Mark archives as viruses (e.g. RAR.ExceededFileSize, Zip.ExceededFilesLimit)
-# if ArchiveMaxFiles, ArchiveMaxFileSize, or ArchiveMaxRecursion limit is
-# reached.
-# Default: no
-#ArchiveBlockMax no
-
-# Enable support for Sensory Networks' NodalCore hardware accelerator.
-# Default: no
-#NodalCoreAcceleration yes
-
-
-##
-## Clamuko settings
-## WARNING: This is experimental software. It is very likely it will hang
-##	    up your system!!!
-##
-
-# Enable Clamuko. Dazuko (/dev/dazuko) must be configured and running.
-# Default: no
-#ClamukoScanOnAccess yes
-
-# Set access mask for Clamuko.
-# Default: no
-#ClamukoScanOnOpen yes
-#ClamukoScanOnClose yes
-#ClamukoScanOnExec yes
-
-# Set the include paths (all files inside them will be scanned). You can have
-# multiple ClamukoIncludePath directives but each directory must be added
-# in a seperate line.
-# Default: disabled
-#ClamukoIncludePath /home
-#ClamukoIncludePath /students
-
-# Set the exclude paths. All subdirectories are also excluded.
-# Default: disabled
-#ClamukoExcludePath /home/bofh
-
-# Don't scan files larger than ClamukoMaxFileSize
-# Value of 0 disables the limit.
-# Default: 5M
-#ClamukoMaxFileSize 10M
+LogFile /var/log/clamd/clamd.log
+LogFileMaxSize 2M
+PidFile /var/run/clamd.pid
+FixStaleSocket yes
+TCPSocket 3310
+TCPAddr 127.0.0.1
+User clamav
--- etc/freshclam.conf.orig	Fri Apr 20 21:20:32 2007
+++ etc/freshclam.conf	Fri Apr 20 21:28:27 2007
@@ -1,124 +1,6 @@
-##
-## Example config file for freshclam
-## Please read the freshclam.conf(5) manual before editing this file.
-##
-
-
-# Comment or remove the line below.
-Example
-
-# Path to the database directory.
-# WARNING: It must match clamd.conf's directive!
-# Default: hardcoded (depends on installation options)
-#DatabaseDirectory /var/lib/clamav
-
-# Path to the log file (make sure it has proper permissions)
-# Default: disabled
-#UpdateLogFile /var/log/freshclam.log
-
-# Enable verbose logging.
-# Default: no
-#LogVerbose yes
-
-# Use system logger (can work together with UpdateLogFile).
-# Default: no
-#LogSyslog yes
-
-# Specify the type of syslog messages - please refer to 'man syslog'
-# for facility names.
-# Default: LOG_LOCAL6
-#LogFacility LOG_MAIL
-
-# This option allows you to save the process identifier of the daemon
-# Default: disabled
-#PidFile /var/run/freshclam.pid
-
-# By default when started freshclam drops privileges and switches to the
-# "clamav" user. This directive allows you to change the database owner.
-# Default: clamav (may depend on installation options)
-#DatabaseOwner clamav
-
-# Initialize supplementary group access (freshclam must be started by root).
-# Default: no
-#AllowSupplementaryGroups yes
-
-# Use DNS to verify virus database version. Freshclam uses DNS TXT records
-# to verify database and software versions. With this directive you can change
-# the database verification domain.
-# WARNING: Do not touch it unless you're configuring freshclam to use your
-# own database verification domain.
-# Default: current.cvd.clamav.net
-#DNSDatabaseInfo current.cvd.clamav.net
-
-# Uncomment the following line and replace XY with your country
-# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
-#DatabaseMirror db.XY.clamav.net
-
-# database.clamav.net is a round-robin record which points to our most 
-# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is 
-# not working. DO NOT TOUCH the following line unless you know what you
-# are doing.
+UpdateLogFile /var/log/clamd/freshclam.log
+PidFile /var/lib/clamav/freshclam.pid
+DatabaseOwner clamav
 DatabaseMirror database.clamav.net
-
-# How many attempts to make before giving up.
-# Default: 3 (per mirror)
-#MaxAttempts 5
-
-# With this option you can control scripted updates. It's highly recommended
-# to keep it enabled.
-#ScriptedUpdates yes
-
-# Number of database checks per day.
-# Default: 12 (every two hours)
-#Checks 24
-
-# Proxy settings
-# Default: disabled
-#HTTPProxyServer myproxy.com
-#HTTPProxyPort 1234
-#HTTPProxyUsername myusername
-#HTTPProxyPassword mypass
-
-# If your servers are behind a firewall/proxy which applies User-Agent
-# filtering you can use this option to force the use of a different
-# User-Agent header.
-# Default: clamav/version_number
-#HTTPUserAgent SomeUserAgentIdString
-
-# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
-# multi-homed systems.
-# Default: Use OS'es default outgoing IP address.
-#LocalIPAddress aaa.bbb.ccc.ddd
-
-# Send the RELOAD command to clamd.
-# Default: no
-#NotifyClamd /path/to/clamd.conf
-
-# Run command after successful database update.
-# Default: disabled
-#OnUpdateExecute command
-
-# Run command when database update process fails.
-# Default: disabled
-#OnErrorExecute command
-
-# Run command when freshclam reports outdated version.
-# In the command string %v will be replaced by the new version number.
-# Default: disabled
-#OnOutdatedExecute command
-
-# Don't fork into background.
-# Default: no
-#Foreground yes
-
-# Enable debug messages in libclamav.
-# Default: no
-#Debug yes
-
-# Timeout in seconds when connecting to database server.
-# Default: 30
-#ConnectTimeout 60
-
-# Timeout in seconds when reading from database server.
-# Default: 30
-#ReceiveTimeout 60
+OnUpdateExecute /bin/run-parts /etc/clamav/onupdateexecute.d/
+OnErrorExecute /bin/run-parts /etc/clamav/onerrorexecute.d/