File rc.lirc of Package lirc - j0ke.net Open Build Service

File rc.lirc of Package lirc (Revision 1c146b139bf5d98b49ac79627b2023e2)

Currently displaying revision 1c146b139bf5d98b49ac79627b2023e2, show latest

#! /bin/sh
# Copyright (c) 1995-2002 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Kurt Garloff <feedback@suse.de>
# Author: Ludwig Nussel <feedback@suse.de>
#
# /etc/init.d/lirc
#   and its symbolic link
# /usr/sbin/rclirc
#
# LSB compatible service control script; see http://www.linuxbase.org/spec/
# 
### BEGIN INIT INFO
# Provides:          lirc
# Required-Start:    $remote_fs
# Required-Stop:     $remote_fs
# Default-Start:     3 5
# Default-Stop:      0 1 2 6
# Short-Description: lirc daemon
# Description:       The  main  task  of lircd is to decode the infrared
#	signals and provide an uniform interface for client applications
### END INIT INFO

# Check for missing binaries (stale symlinks should not happen)
lircd_BIN=/usr/sbin/lircd
test -x $lircd_BIN || exit 5

# Check for existence of needed config file and read it
lircd_CONFIG=/etc/sysconfig/lirc
test -r $lircd_CONFIG || exit 6
. $lircd_CONFIG

# Source LSB init functions
# providing start_daemon, killproc, pidofproc, 
# log_success_msg, log_failure_msg and log_warning_msg.
# This is currently not used by UnitedLinux based distributions and
# not needed for init scripts for UnitedLinux only. If it is used,
# the functions from rc.status should not be sourced or used.
#. /lib/lsb/init-functions

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     ditto but be verbose in local rc status
#      rc_status -v -r  ditto and clear the local rc status
#      rc_status -s     display "skipped" and exit with status 3
#      rc_status -u     display "unused" and exit with status 3
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num>
#      rc_reset         clear local rc status (overall remains)
#      rc_exit          exit appropriate to overall rc status
#      rc_active	checks whether a service is activated by symlinks
#      rc_splash arg    sets the boot splash screen to arg (if active)
. /etc/rc.status

# Reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0	  - success
# 1       - generic or unspecified error
# 2       - invalid or excess argument(s)
# 3       - unimplemented feature (e.g. "reload")
# 4       - user had insufficient privileges
# 5       - program is not installed
# 6       - program is not configured
# 7       - program is not running
# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.

setdefaults()
{
    # set LIRCD_DEVICE default if unset
    for retries in 1 2 3 4 5; do
        if test "$LIRCD_DEVICE" != ""; then
            break;
        fi
        if test -L "/dev/input/ir"; then
	    # have input driver
	    LIRCD_DEVICE="/dev/input/ir"
        elif grep -q BaseRemoteCtl /proc/devices && [ -e /dev/lirc ]; then
	    # have lirc driver
	    LIRCD_DEVICE="/dev/lirc"
        else
	    # hotplug not finished yet?
	    echo -n .
	    sleep 1
        fi
    done

# set LIRCD_DRIVER default if unset
    if test "$LIRCD_DRIVER" = "" -a "$LIRCD_DEVICE" = "/dev/input/ir"; then
	LIRCD_DRIVER="dev/input"
    fi
}

makeargs()
{
    # print args
    [ -n "$LIRCD_DRIVER" ]     && echo "-H" "\"$LIRCD_DRIVER\""
    [ -n "$LIRCD_DEVICE" ]     && echo "-d" "\"$LIRCD_DEVICE\""
    [ -n "$LIRCD_LISTENPORT" ] && echo "\"-l$LIRCD_LISTENPORT\""
    [ -n "$LIRCD_CONNECT" ]    && echo "\"-c$LIRCD_CONNECT\""
}

case "$1" in
    start)
	echo -n "Starting lircd "
	modinfo evdev > /dev/null 2>&1 && modprobe evdev || :
	if test "$LIRC_MODULE" != ""; then
		modprobe "$LIRC_MODULE"
	fi
	setdefaults
	if [ -z "$LIRCD_DRIVER" -a -z "$LIRCD_DEVICE" -a ! -e /dev/lirc ]; then
		echo -n "Error: no device found"
		rc_failed 6
		rc_status -v
		rc_exit
	fi
	if [ ! -e /etc/lircd.conf ]; then
		if [ "$LIRCD_DEVICE" = "/dev/input/ir" -a -e "$LIRCD_DEVICE" ]; then
			install -m 644 /usr/share/lirc/remotes/linux-input-layer-lircd.conf /etc/lircd.conf
		else
			echo -n "Error: please create /etc/lircd.conf"
			rc_failed 6
			rc_status -v
			rc_exit
		fi
	fi
	[ -n "$LIRCD_DEVICE" ] && echo -n "($LIRCD_DEVICE)"
	install -m "$LIRCD_DEV_PERMISSIONS" /dev/null /var/run/lirc/lircd
	chown "$LIRCD_DEV_OWNER"	/var/run/lirc/lircd
	if [ ! -L /dev/lircd ]; then
		rm -f /dev/lircd
		ln -s /var/run/lirc/lircd /dev/lircd 
	fi
	## Start daemon with startproc(8). If this fails
	## the return value is set appropriately by startproc.
	eval startproc $lircd_BIN $(makeargs)

# Remember status and be verbose
	rc_status -v
	;;
    stop)
	echo -n "Shutting down lircd "
	## Stop daemon with killproc(8) and if this fails
	## killproc sets the return value according to LSB.

killproc -TERM $lircd_BIN

# Remember status and be verbose
	rc_status -v
	;;
    try-restart)
	## Do a restart only if the service was active before.
	## Note: try-restart is not (yet) part of LSB (as of 1.2)
	$0 status >/dev/null &&  $0 restart

# Remember status and be quiet
	rc_status
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 stop
	$0 start

# Remember status and be quiet
	rc_status
	;;
    force-reload)
	## Signal the daemon to reload its config. Most daemons
	## do this on signal 1 (SIGHUP).
	## If it does not support it, restart.

echo -n "Reload service lircd "
	## if it supports it:
	killproc -HUP $lircd_BIN
	#touch /var/run/lircd.pid
	rc_status -v

## Otherwise:
	#$0 stop  &&  $0 start
	#rc_status
	;;
    reload)
	## Like force-reload, but if daemon does not support
	## signaling, do nothing (!)

# If it supports signaling:
	echo -n "Reload service lircd "
	killproc -HUP $lircd_BIN
	#touch /var/run/lircd.pid
	rc_status -v
	
	## Otherwise if it does not support reload:
	#rc_failed 3
	#rc_status -v
	;;
    status)
	echo -n "Checking for service lircd "
	## Check status with checkproc(8), if process is running
	## checkproc will return with exit status 0.

# Return value is slightly different for the status command:
	# 0 - service up and running
	# 1 - service dead, but /var/run/  pid  file exists
	# 2 - service dead, but /var/lock/ lock file exists
	# 3 - service not running (unused)
	# 4 - service status unknown :-(
	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
	
	# NOTE: checkproc returns LSB compliant status values.
	checkproc $lircd_BIN
	# NOTE: rc_status knows that we called this init script with
	# "status" option and adapts its messages accordingly.
	rc_status -v
	;;
    probe)
	## Optional: Probe for the necessity of a reload, print out the
	## argument to this init script which is required for a reload.
	## Note: probe is not (yet) part of LSB (as of 1.2)

if test /etc/sysconfig/lirc -nt /var/run/lircd.pid; then
		 echo reload
	elif test /etc/lircd.conf -nt /var/run/lircd.pid; then
		 echo reload
	fi
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
	exit 1
	;;
esac
rc_exit