File subversion.rcsvnserve of Package subversion16

File subversion.rcsvnserve of Package subversion16 (Revision 17)

Currently displaying revision 17, show latest

#! /bin/sh
# Copyright (c) 1995-2002 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# /etc/init.d/svnserve
#   and its symbolic link
# /usr/sbin/rcsvnserve
#
# LSB compatible service control script; see http://www.linuxbase.org/spec/
# 
# Note: This script uses functions rc_XXX defined in /etc/rc.status on
# UnitedLinux (UL) based Linux distributions. If you want to base your 
# script on this template and ensure that it works on non UL based LSB 
# compliant Linux distributions, you either have to provide the rc.status
# functions from UL or change the script to work without them.

### BEGIN INIT INFO
# Provides:          svnserve
# Required-Start:
# Should-Start:      $time ypbind sendmail $syslog $remote_fs
# Required-Stop:     $syslog $remote_fs
# Should-Stop:       $time ypbind sendmail
# Default-Start:     3 5
# Default-Stop:      0 1 2 6
# Short-Description:  svnserve
# Description:        readonly access to a subversion repository
### END INIT INFO

# Note on runlevels: 
# 0 - halt/poweroff 			6 - reboot
# 1 - single user			2 - multiuser without network exported
# 3 - multiuser w/ network (text mode)  5 - multiuser w/ network and X11 (xdm)
# 
# Note on script names:
# http://www.linuxbase.org/spec/refspecs/LSB_1.2.0/gLSB/scrptnames.html
# A registry has been set up to manage the init script namespace.
# http://www.lanana.org/
# Please use the names already registered or register one or use a
# vendor prefix.

# Check for missing binaries (stale symlinks should not happen)
SVNSERVE_BIN=/usr/bin/svnserve
test -x $SVNSERVE_BIN || exit 5

# Check for existence of needed config file and read it
SVNSERVE_CONFIG=/etc/sysconfig/svnserve
test -r $SVNSERVE_CONFIG || exit 6
. $SVNSERVE_CONFIG

# Source LSB init functions
# providing start_daemon, killproc, pidofproc, 
# log_success_msg, log_failure_msg and log_warning_msg.
# This is currently not used by UnitedLinux based distributions and
# not needed for init scripts for UnitedLinux only. If it is used,
# the functions from rc.status should not be sourced or used.
#. /lib/lsb/init-functions

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     be verbose in local rc status and clear it afterwards
#      rc_status -v -r  ditto and clear both the local and overall rc status
#      rc_status -s     display "skipped" and exit with status 3
#      rc_status -u     display "unused" and exit with status 3
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num>
#      rc_reset         clear both the local and overall rc status
#      rc_exit          exit appropriate to overall rc status
#      rc_active        checks whether a service is activated by symlinks
#      rc_splash arg    sets the boot splash screen to arg (if active)
. /etc/rc.status

# Reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0	  - success
# 1       - generic or unspecified error
# 2       - invalid or excess argument(s)
# 3       - unimplemented feature (e.g. "reload")
# 4       - user had insufficient privileges
# 5       - program is not installed
# 6       - program is not configured
# 7       - program is not running
# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.

case "$1" in
    start)
	echo -n "Starting svnserve "
	## Start daemon with startproc(8). If this fails
	## the return value is set appropriately by startproc.
	startproc -u "$SVNSERVE_USERID" -g "$SVNSERVE_GROUPID" -e $SVNSERVE_BIN $SVNSERVE_OPTIONS

# Remember status and be verbose
	rc_status -v
	;;
    stop)
	echo -n "Shutting down svnserve "
	## Stop daemon with killproc(8) and if this fails
	## killproc sets the return value according to LSB.

killproc -TERM $SVNSERVE_BIN

# Remember status and be verbose
	rc_status -v
	;;
    try-restart)
	## Do a restart only if the service was active before.
	## Note: try-restart is not (yet) part of LSB (as of 1.2)
	$0 status >/dev/null &&  $0 restart

# Remember status and be quiet
	rc_status
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 stop
	$0 start

# Remember status and be quiet
	rc_status
	;;
    force-reload)

echo -n "Reload service svnserve "
	$0 stop  &&  $0 start
	#rc_status
	;;
    status)
	echo -n "Checking for service svnserve "
	## Check status with checkproc(8), if process is running
	## checkproc will return with exit status 0.

# Return value is slightly different for the status command:
	# 0 - service up and running
	# 1 - service dead, but /var/run/  pid  file exists
	# 2 - service dead, but /var/lock/ lock file exists
	# 3 - service not running (unused)
	# 4 - service status unknown :-(
	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
	
	# NOTE: checkproc returns LSB compliant status values.
	checkproc $SVNSERVE_BIN
	# NOTE: rc_status knows that we called this init script with
	# "status" option and adapts its messages accordingly.
	rc_status -v
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload}"
	exit 1
	;;
esac
rc_exit