Changes - j0ke.net Open Build Service

Changes of Revision 7

[-] [+]	Deleted	hddtemp.changes
@@ -1,5 +0,0 @@ -------------------------------------------------------------------- -Tue Jan 16 13:28:51 CET 2007 - mskibbe@suse.de - -- create package -
[-] [+]	Changed	hddtemp.spec ^
@@ -11,27 +11,71 @@ Autoreqprov: on Version: 0.3 %define ref beta15 -Release: 20 +Release: 45 URL: http://hddtemp.sourceforge.net Summary: Advanced Web Statistics Source: %name-%{version}-%{ref}.tar.bz2 Source1: hddtemp.db +Source2: hddtemp.init +Source3: hddtemp.sysconfig +Source4: hddtemp-db.patch +Patch0: hddtemp_0.3-beta15-45.diff.bz2 + BuildRoot: %{_tmppath}/%{name}-%{version}-build %description +hddtemp is tool that gives you the temperature of your hard drive by +reading S.M.A.R.T. information. + +%description -l de +htddtemp ist ein Tool zum auslesen der Festplattentemperatur aus den +S.M.A.R.T Informationenen. %prep %setup -n %name-%{version}-%{ref} +%patch0 -p1 %build %configure -make CFLAGS="$RPM_OPT_FLAGS" +%__make CFLAGS="$RPM_OPT_FLAGS" %install -%makeinstall +%__make DESTDIR=%{buildroot} install %__install -D -m644 %{S:1} %{buildroot}/usr/share/misc/hddtemp.db +%__patch -p0 %{buildroot}/usr/share/misc/hddtemp.db %{S:4} +%__install -D -m755 %{S:2} %{buildroot}%{_initdir}/%{name} + +%if 0%{?suse_version} +%__install -D -m644 %{S:3} %{buildroot}/var/adm/fillup-templates/sysconfig.%{name} +%else +%__install -D -m644 %{S:3} %{buildroot}%{_sysconfdir}/sysconfig/%{name} +%endif + +%post +if [ ! -f /etc/bash.bashrc.local ] ; then + echo PATH=\$PATH:/usr/sbin >> /etc/bash.bashrc.local +else + CAT=`cat /etc/bash.bashrc.local \| grep /usr/sbin` + if [ "$CAT" != "PATH=\$PATH:/usr/sbin" ] ; then + echo PATH=\$PATH:/usr/sbin >> /etc/bash.bashrc.local + fi +fi +case "$1" in + 1) # new install + %fillup_and_insserv + ;; + 2) # upgrade/reinstall + %restart_on_update %{name} + ;; +esac + +%preun +if [ "$1" = "0" ]; then # remove + %stop_on_removal %{name} +fi + %clean rm -rf $RPM_BUILD_ROOT @@ -42,7 +86,17 @@ %{_datadir}/locale//LC_MESSAGES/hddtemp.mo %{_mandir}/man8/hddtemp.8 %{_datadir}/misc/hddtemp.db +%if 0%{?suse_version} +/var/adm/fillup-templates/sysconfig.%{name} +%else +%{_sysconfdir}/sysconfig/%{name} +%endif %changelog +* Sun Aug 08 2009 Carsten Schoene <cs@linux-administrator.com> - 0.3.beta15-45 +- added initscript +- added sysconfig file +- added patch from debian (manpage and other small fixes) + * Sat Aug 01 2009 Carsten Schoene <cs@linux-administrator.com> - 0.3.beta15-20 - include hddtemp.db
[-] [+]	Added	hddtemp-db.patch ^
@@ -0,0 +1,158 @@ +--- hddtemp.db.orig 2008-04-26 21:41:30.000000000 +0200 ++++ hddtemp.db 2008-04-26 23:02:25.000000000 +0200 +@@ -80,6 +80,8 @@ + + "FUJITSU MHV2100AH" 194 C "FUJITSU MHV2100AH" + "FUJITSU MHV2100AT" 194 C "FUJITSU MHV2100AT" ++"FUJITSU MHV2100BH" 194 C "FUJITSU MHV2100BH" ++"FUJITSU MHV2060AH" 194 C "FUJITSU MHV2060AH" + "FUJITSU MHV2080[AB]H" 194 C "FUJITSU MHV2080AH" + + "FUJITSU MPF3204AH" 194 C "Fujitsu MPF3204AH" +@@ -197,6 +199,7 @@ + "Maxtor 6V320F0" 194 C "Maxtor Diamond Max 10 SATA II 320 GB" + "Maxtor 6Y(06\|08\|12\|16\|20\|25)0[LPM]0" 194 C "Maxtor DiamondMax Plus 9" + "Maxtor 7L300[RS]0" 194 C "Maxtor 7L300R0 MaxLine+III 300GB 7200rpm" ++"Maxtor 7[LV](25\|30)0[RSF]0" 194 C "Maxtor MaxLineIII 250/300GB" + "Maxtor 7Y250[PM]0" 194 C "Maxtor MaXLine Plus II 250GB 7200RPM" + "Maxtor 94098U8" 11 C "Maxtor DiamondMax 40 94098U8" + +@@ -247,11 +250,12 @@ + ############# Samsung drives + ######################################## + # somenone reported a problem with the SP8004H which reports a temperature +-# 10°C below the ambient temperature ++# 10ï¿½C below the ambient temperature + "SAMSUNG HA(200\|250)JC" 194 C "Samsung SpinPoint V120CE series" + "SAMSUNG HD160JJ" 194 C "Samsung 160GB, 7200RPM, 8MB cache, SATA" + "SAMSUNG HD160JJ/P" 194 C "Samsung SpinPoint P80 SD 160GB (7200RPM, 8MB cache)" + "SAMSUNG HD[30\|32\|40][01]L[DJ]" 194 C "Samsung SpinPoint T133 series (300-400MB)" ++"SAMSUNG HD300LJ" 194 C "Samsung SpinPoint T series" + "SAMSUNG HD250KD" 194 C "Samsung SpinPoint T133 series (250 MB PATA)" + "SAMSUNG HD321KJ" 194 C "Samsung Spinpoint T166 (7200RPM, 16MB cache) - SATA" + "SAMSUNG HD501LJ" 194 C "Samsung HD501LJ" +@@ -301,6 +305,7 @@ + "ST340014A" 194 C "Seagate Barracuda 7200.7 40Gb" + "ST340015A" 194 C "Seagate Barracuda 5400.1 40GB" + "ST340016A" 194 C "Seagate ST340016A" ++"ST3400633(A\|AS)" 194 C "Seagate Barracuda 7200.9 400 GB" + "ST340810A" 194 C "Seagate U Series 40810 (40Gb, Ultra ATA/100, 5400 rpm)" + "ST340823A" 194 C "Seagate U Series 5 40823" + "ST340824A" 194 C "Seagate Barracuda III" +@@ -325,22 +330,30 @@ + "ST3120026A" 194 C "Seagate Barracuda V ST3120026A" + "ST3160021A" 194 C "Seagate Barracuda 7200.7 - ST3160021A" + "ST3160023(A\|AS)" 194 C "Seagate Barracuda V ST3160023A and AS (160Gb, ATA100 or Serial ATA)" ++"ST316081[12](A\|AS)" 194 C "Seagate Barracuda 7200.9 160GB" + "ST3160827AS" 194 C "Seagate Barracuda 7200.7 160GB (Serial ATA)" + "ST3200021A" 194 C "Seagate Barracuda 7200.7 Plus 200GB" ++"ST3200[68]20(A\|AS)" 194 C "Seagate Barracuda 7200.10 200GB" + "ST3200822(A\|AS)" 194 C "Seagate Barracuda 7200.7 Plus 200GB (PATA or SATA)" +-"ST3200826A" 194 C "Seagate Barracuda 7200.8 200Gb" ++"ST3200826A" 194 C "Seagate Barracuda 7200.8 200GB" + "ST3250623A" 194 C "Seagate Barracuda 7200.16 250GB" ++"ST3250624AS" 194 C "Seagate Barracuda 7200.9 250GB SATA" ++"ST3250624NS" 194 C "Seagate NL35 SATA (RAID-Edition) 7200 250GB" + "ST3250823A" 194 C "Seagate Barracuda 7200.8 250GB" +-"ST3250823A" 194 C "Seagate Barracuda 7200.7 Plus 250GB" + "ST3250823NS" 194 C "Seagate NL35 SATA (RAID-Edition) 7200 250GB" ++"ST3300[68]20(A\|AS)" 194 C "Seagate Barracuda 7200.10 300GB" + "ST3300831A" 194 C "Seagate 300GB ST3300831A" + "ST3400832A" 194 C "Seagate Barracuda 7200.8 Plus 400GB" ++"ST3320[68]20(A\|AS)" 194 C "Seagate Barracuda 7200.10 320GB" ++"ST3400[68]20(A\|AS)" 194 C "Seagate Barracuda 7200.10 400GB" + "ST3400633(A\|AS)" 194 C "Seagate Barracuda 7200.7 400 GB" + "ST3500630NS" 194 C "Seagate" + "ST3400632NS" 194 C "Seagate" + "ST3320620AS" 194 C "Seagate Barracuda 7200.7 320 GB" + "ST3500630AS" 194 C "Seagate Barracuda 7200.7 500 GB" +-"ST3802110A" 194 C "Seagate Barracuda 7200.9 80 GB" ++"ST3500[68]30(A\|AS)" 194 C "Seagate Barracuda 7200.10 500GB" ++"ST3750[68]40(A\|AS)" 194 C "Seagate Barracuda 7200.10 750GB" ++"ST380[28]110(A\|AS)" 194 C "Seagate Barracuda 7200.9 80 GB" + "ST910021A" 194 C "Seagate Momentus 7200.1 100GB" + "ST910082[35]A" 194 C "Seagate Momentus 5400.2 100GB" + "ST9120821A" 194 C "Seagate Momentus 5400.2 120GB" +@@ -351,12 +364,14 @@ + "ST960822A" 194 C "Seagate Momentus 5400.2 60GB" + "ST96812AS" 194 C "Seagate Momentus 5400.2 60GB SATA" + "ST9808211A" 194 C "Seagate Momentus 5400.2 80GB" ++"ST98823AS" 194 C "Seagate Momentus 5400.2 80GB SATA" + + ######################################## + ############# TOSHIBA Laptops + ######################################## + "MK4313MAT" 220 C "Toshiba MK4313MAT" + "TOSHIBA MK1032GAX" 194 C "Toshiba MK1032GAX" ++"TOSHIBA MK1032GSX" 194 C "Toshiba MK1032GSX" + "TOSHIBA MK1517GAP" 0 C "Toshiba MK1517GAP" + "TOSHIBA MK2018GAS" 226 F "Toshiba MK2018GAS" + "TOSHIBA MK2023GAS" 194 C "Toshiba MK2023GAS" +@@ -377,6 +392,7 @@ + "TOSHIBA MK6026GAX" 194 C "Toshiba MK6026GAX" + "TOSHIBA MK8025GAS" 194 C "Toshiba MK8025GAS" + "TOSHIBA MK8026GAX" 194 C "Toshiba MK8026GAX" ++"TOSHIBA MK8032GSX" 194 C "Toshiba MK8032GSX" + + "MK4025GAS" 194 C "Toshiba MK4025GAS" + +@@ -397,7 +413,7 @@ + "WDC WD300BB-00CAA0" 0 C "Western Digital WD300BB" + "WDC WD360GD-00FNA0" 194 C "Western Digital SATA Raptor 36.7GB" + "WDC WD400BB-00CAA0" 0 C "Western Digital 400BB-00CAA0" +-"WDC WD400BB-00J[KH]A0" 194 C "Western Digital Caviar WD400BB" ++"WDC WD400BB-00[DJ][KH]A0" 194 C "Western Digital Caviar WD400BB" + "WDC WD400BB-23JHC0" 194 C "Western Digital 23JHC0" + #"WDC WD400BB-00GFA0" 0 C "" + "WDC WD400BB-55HEA0" 194 C "Western Digital Caviar WD400BB" +@@ -416,7 +432,7 @@ + "WDC WD600VE-75HDT0" 194 C "Western Digital 600VE-75HDT0" + "WDC WD600VE-00HDT0" 194 C "Western Digital 600VE-00HDT0" + "WDC WD740GD-00FL21.0" 194 C "Western Digital SATA Raptor" +-"WDC WD740GD-([05]0FL[AC]0\|75FLA1)" 194 C "Western Digital SATA Raptor 74GB 8MB" ++"WDC WD740GD-([05]0FL[AC][01]\|75FLA1)" 194 C "Western Digital SATA Raptor 74GB 8MB" + "WDC WD800BB-00CAA1" 0 C "Western Digital WD800BB-00CAA1" + "WDC WD800BB-(00\|22)DKA0" 194 C "Western Digital WD800BB 80 Go" + "WDC WD800BB-32CCB0" 194 C "Western Digital 800BB-32CCB0" +@@ -428,31 +444,37 @@ + "WDC WD800JB-00CRA1" 0 C "Western Digital Caviar WD800JB" + "WDC WD800JB-00(ET\|FM\|FS)A0" 194 C "Western Digital Caviar 80GB Special Edition 8MB" + "WDC WD800JB-00JJ[AC]0" 194 C "Western Digital WD800JB" +-"WDC WD800JD-(00\|55)(HK\|JR)A0" 194 C "Western Digital SATA 80GB, 8MB Cache" ++"WDC WD800JD-(00\|55\|75)(HK\|JR\|JN)[AC]0" 194 C "Western Digital SATA 80GB, 8MB Cache" + "WDC WD800JD-00(HK\|JN)A0" 194 C "Western Digital SATA 80GB, 8MB Cache" + "WDC WD800LB-(00\|55)DNA0" 194 C "Western Digital Caviar WD800LB 80 Go ATA-100" + "WDC WD800VE-07HDT0" 194 C "Western Digital 800VE-07HDT0" + "WDC WD1200BB-00(FTA\|GUA)0" 194 C "Western Digital Caviar EIDE 2MB Cache" +-"WDC WD1200JB-00(EV\|FU\|GV)A0" 194 C "Western Digital Caviar 120GB Special Edition 8MB" ++"WDC WD1200JB-00(EV\|FU\|GV\|RE)A0" 194 C "Western Digital Caviar 120GB Special Edition 8MB" + "WDC WD1200JB-22GVA0" 194 C "Western Digital Caviar 120GB" +-"WDC WD1200JD-00(GBB\|HBC)0" 194 C "Western Digital WD1200JD" ++"WDC WD1200JD-00(GBB\|HBC\|FYB)0" 194 C "Western Digital WD1200JD" + "WDC WD1200LB-55EDA0" 194 C "Western Digital WD1220LB" + "WDC WD1200SB-01KB[AC]0" 194 C "Western Digital Caviar RE (Raid Edition) 120 GB" ++"WDC WD1500ADFD-00NLR0" 194 C "Western Digital SATA Raptor 150GB 16MB" + "WDC WD1600BB-00DWA0" 194 C "Western Digital Caviar WD1600BB" + "WDC WD1600JB-(00EV\|00FU\|00GV\|22GV\|75GV)A0" 194 C "Western Digital Caviar 160GB Special Edition 8MB" + "WDC WD2000BB-00FTA0" 194 C "Western Digital WD2000BB" + "WDC WD2000JB-(00EV\|32EV\|34EV\|00FU\|00GV\|55GV\|98GV\|00KF)A0" 194 C "Western Digital Caviar 200GB Special Edition 8MB" + "WDC WD2000JB-00GVC0" 194 C "Western Digital WD2000JB" ++"WDC WD2000JD-00FYB0" 194 C "Western Digital WD2000JD" + "WDC WD2000JS-00MHB1" 194 C "Western Digital SATA 200GB" + "WDC WD2500JB-(00RE\|00EV\|00FU\|32FU\|00GV\|55GV)A0" 194 C "Western Digital Caviar 250GB Special Edition 8MB" + "WDC WD2500JB-00GVC0" 194 C "Western Digital 250GB" +-"WDC WD2500JD-(00G\|32H)BB0" 194 C "Western Digital SATA Caviar 250GB Special Edition 8MB" ++"WDC WD2500JD-(00G\|32H\|75H)BB0" 194 C "Western Digital SATA Caviar 250GB Special Edition 8MB" + "WDC WD2500JD-40HBC0" 194 C "Western Digital WD2500JD-40HBC0" + "WDC WD2500PB-98FBA0" 194 C "Western Digital Caviar 250GB Special Edition 8MB" + "WDC WD2500PD-00FZB1" 194 C "Western Digital WD2500PD-00FZB1" + "WDC WD2500SD-01KCB0" 194 C "Western Digital Caviar RE 250GB 8MB" ++"WDC WD2500KS-00MJB0" 194 C "Western Digital Caviar SE16 250GB 16MB" ++"WDC WD2500YD-01NVB1" 194 C "Western Digital Caviar RE 250GB 16MB" + "WDC WD3000JB-00KFA0" 194 C "Western Digital WD3000JB" + "WDC WD3200JB-00KFA0" 194 C "Western Digital Caviar 320GB 8MB" ++"WDC WD3200KS-00PFB0" 194 C "Western Digital Caviar 320GB 16MB" ++"WDC WD3200SD-01KNB0" 194 C "Western Digital Caviar RE 320GB SATA 8MB" + "WDC WD4000KD-00NAB0" 194 C "Western Digital Caviar SE16 400GB 16MB" + "WDC WD4000YR-01PLB0" 194 C "Western Digital Caviar RE2 400GB 16MB" + "WD4000YS-01MPB0" 194 C "Western Digital RE2 7200 SATA II 400 GB"
[-] [+]	Added	hddtemp_0.3-beta15-45.diff.bz2 ^
@@ -0,0 +1,6989 @@ +--- hddtemp-0.3-beta15.orig/README ++++ hddtemp-0.3-beta15/README +@@ -28,10 +28,7 @@ + INFORMATION + =========== + hddtemp accesses to the SATA disks via ATA pass-through commands (defined in +-T10/04-262r7). At the time of writing (kernel 2.6.11-rc5 has just been +-released), kernels doesn't have support for ATA pass-through. You have to +-update the libata driver with a newer version that could be found on: +-http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/ ++T10/04-262r7). Only kernel >= 2.6.16 have this support. + + In daemon mode, hddtemp doesn't allow too much query at a time. If the interval + between two query is inferior to 1 minute, hddtemp will give the previous value +--- hddtemp-0.3-beta15.orig/po/fr.po ++++ hddtemp-0.3-beta15/po/fr.po +@@ -7,8 +7,8 @@ + msgid "" + msgstr "" + "Project-Id-Version: fr\n" +-"Report-Msgid-Bugs-To: hddtemp@guzu.net\n" +-"POT-Creation-Date: 2005-02-25 22:43+0100\n" ++"Report-Msgid-Bugs-To: \n" ++"POT-Creation-Date: 2006-06-29 16:24+0200\n" + "PO-Revision-Date: 2003-06-03 00:58GMT+1\n" + "Last-Translator: Aurelien Jarno <aurelien@aurel32.net>\n" + "Language-Team: FRANCAIS <fr@li.org>\n" +@@ -17,23 +17,7 @@ + "Content-Transfer-Encoding: 8bit\n" + "X-Generator: KBabel 1.0.1\n" + +-#: src/hddtemp.c:112 +-#, c-format +-msgid "" +-"\n" +-"Regexp%s\| Value \| Description\n" +-"------%s---------------------\n" +-msgstr "" +-"\n" +-"Regexp%s\| Valeur \| Description\n" +-"------%s----------------------\n" +- +-#: src/hddtemp.c:118 +-#, c-format +-msgid "%s%s\| %5d \| %s\n" +-msgstr "%s%s\| %5d \| %s\n" +- +-#: src/hddtemp.c:161 ++#: src/hddtemp.c:156 + #, c-format + msgid "" + "\n" +@@ -46,7 +30,7 @@ + "Modèle: %s\n" + "\n" + +-#: src/hddtemp.c:188 ++#: src/hddtemp.c:189 + #, c-format + msgid "" + "WARNING: Drive %s doesn't seem to have a temperature sensor.\n" +@@ -60,75 +44,60 @@ + "net).\n" + "ATTENTION : Voir les options --help, --debug et --drivebase.\n" + +-#: src/hddtemp.c:192 ++#: src/hddtemp.c:197 + #, c-format + msgid "%s: %s: no sensor\n" + msgstr "%s: %s : pas de capteur\n" + +-#: src/hddtemp.c:197 +-#, c-format +-msgid "" +-"WARNING: Drive %s doesn't appear in the database of supported drives\n" +-"WARNING: But using a common value, it reports something.\n" +-"WARNING: Note that the temperature shown could be wrong.\n" +-"WARNING: See --help, --debug and --drivebase options.\n" +-"WARNING: And don't forget you can add your drive to hddtemp.db\n" +-msgstr "" +-"ATTENTION : Le lecteur %s n'apparait pas dans la base de données des " +-"lecteurs supportés\n" +-"ATTENTION : Mais en utilisant une valeur courante, il renvoie quelque " +-"chose.\n" +-"ATTENTION : Notez que la température renvoyée peut être erronée.\n" +-"ATTENTION : Voir les options --help, --debug et --drivebase.\n" +-"ATTENTION : Et n'oubliez pas d'ajouter votre lecteur au fichier hddtemp.db\n" +- +-#: src/hddtemp.c:202 ++#: src/hddtemp.c:211 + #, c-format + msgid "%s: %s: %d%sC or %sF\n" + msgstr "%s: %s : %d%sC ou %sF\n" + +-#: src/hddtemp.c:214 ++#: src/hddtemp.c:235 + #, c-format + msgid "%s: %s: drive is sleeping\n" + msgstr "%s: %s : le lecteur est en veille\n" + +-#: src/hddtemp.c:217 ++#: src/hddtemp.c:242 + #, c-format +-msgid "%s: %s: known drive, but it doesn't have a temperature sensor.\n" ++msgid "%s: %s: drive supported, but it doesn't have a temperature sensor.\n" + msgstr "" + "%s: %s: lecteur connu, mais il ne possède pas de capteur de température.\n" + +-#: src/hddtemp.c:220 ++#: src/hddtemp.c:246 + #, c-format + msgid "ERROR: %s: %s: unknown returned status\n" + msgstr "ERREUR : %s : %s : status inconnu\n" + +-#: src/hddtemp.c:235 ++#: src/hddtemp.c:261 + #, c-format + msgid "" + "\n" + "If one of the field value seems to match the temperature, be sure to read\n" +-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n" ++"the hddtemp man page before sending a report (section REPORT). Thanks.\n" + msgstr "" + +-#: src/hddtemp.c:308 ++#: src/hddtemp.c:338 + #, c-format + msgid "ERROR: invalid separator.\n" + msgstr "ERREUR : séparateur invalide.\n" + +-#: src/hddtemp.c:319 ++#: src/hddtemp.c:349 + #, c-format + msgid "ERROR: invalid port number.\n" + msgstr "ERREUR : numéro de port invalide.\n" + +-#: src/hddtemp.c:329 +-#, fuzzy, c-format ++#: src/hddtemp.c:371 ++#, c-format + msgid "" +-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n" ++" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n" + "\n" + " hddtemp displays the temperature of drives supplied in argument.\n" + " Drives must support S.M.A.R.T.\n" + "\n" ++" TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n" ++"\n" + " -b --drivebase : display database file content that allow hddtemp to\n" + " recognize supported drives.\n" + " -D --debug : display various S.M.A.R.T. fields and their values.\n" +@@ -138,6 +107,7 @@ + " -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by " + "default.)\n" + " -f --file=FILE : specify database file to use.\n" ++" -F --foreground : don't daemonize, stay in foreground.\n" + " -l --listen=addr : listen on a specific interface (in TCP/IP daemon " + "mode).\n" + " -n --numeric : print only the temperature.\n" +@@ -145,6 +115,8 @@ + " -s --separator=C : separator to use between fields (in TCP/IP daemon " + "mode).\n" + " -S --syslog=s : log temperature to syslog every s seconds.\n" ++" -u --unit=[C\|F] : force output temperature either in Celius or " ++"Fahrenheit.\n" + " -q --quiet : do not check if the drive is supported.\n" + " -v --version : display hddtemp version number.\n" + " -w --wake-up : wake-up the drive if need.\n" +@@ -172,6 +144,7 @@ + "défaut).\n" + " -f --file=FILE : specifie le fichier à utiliser comme base de " + "données.\n" ++" -F --foreground : ne pas démoniser, rester au premier plan.\n" + " -l --listen=addr : écoute sur une interface spécifique (en mode démon " + "TCP/IP).\n" + " -n --numeric : affiche seulement la température.\n" +@@ -188,62 +161,95 @@ + "\n" + "Report bugs or new drives to <hddtemp@guzu.net>.\n" + +-#: src/hddtemp.c:522 ++#: src/hddtemp.c:402 + #, c-format + msgid "hddtemp version %s\n" + msgstr "hddtemp version %s\n" + +-#: src/hddtemp.c:547 ++#: src/hddtemp.c:418 + #, c-format + msgid "ERROR: invalid interval.\n" + msgstr "ERREUR : intervalle invalide.\n" + +-#: src/hddtemp.c:547 ++#: src/hddtemp.c:438 ++#, c-format + msgid "Too few arguments: you must specify one drive, at least.\n" + msgstr "Trop peu d'arguments : vous devez spécifier au moins un lecteur.\n" +
[-] [+]	Added	hddtemp.init ^
@@ -0,0 +1,176 @@ +#! /bin/sh +# +# Copyright (c) 1995-2000 SuSE GmbH Nuernberg, Germany. +# +# CoAuthor: Mr.Bool <mr.bool@rambler.ru> ;-) +# +# /etc/init.d/hddtemp +# +# and symbolic its link +# +# /usr/sbin/rchddtemp +# +### BEGIN INIT INFO +# Provides: hddtemp +# Required-Start: +# Required-Stop: +# Default-Start: 3 5 +# Default-Stop: 0 6 +# Description: Start the hddtemp daemon +### END INIT INFO + +. /etc/rc.status +. /etc/sysconfig/hddtemp + +# Shell functions sourced from /etc/rc.status: +# rc_check check and set local and overall rc status +# rc_status check and set local and overall rc status +# rc_status -v ditto but be verbose in local rc status +# rc_status -v -r ditto and clear the local rc status +# rc_failed set local and overall rc status to failed +# rc_reset clear local rc status (overall remains) +# rc_exit exit appropriate to overall rc status + +# First reset status of this service +rc_reset + +HDDTEMP_EXEC=`/usr/bin/whereis $HDDTEMP_NAME \| grep $HDDTEMP_NAME \| awk '{print $2;}'` + +if ! test -f $HDDTEMP_EXEC ; then + echo "$HDDTEMP_EXEC not found." + rc_failed 1 +fi + +if ! test -f $HDDTEMP_DB ; then + echo "$HDDTEMP_DB not found." + rc_failed 1 +fi + +if test "$DEVICE" = ""; then +# echo "device is not defined." + rc_failed 6 +fi + +if test "$HDDTEMP_PORT" = ""; then +# echo "port is not defined." + rc_failed 6 +fi + +case "$1" in + start) + echo -n "Starting $HDDTEMP_NAME daemon for $DEVICE" + ## Start daemon with startproc(8). If this fails + ## the echo return value is set appropriate. + + startproc -f -q $HDDTEMP_EXEC $HDDTEMP_ARGS + + # Remember status and be verbose + rc_status -v + ;; + stop) + echo -n "Shutting down $HDDTEMP_NAME daemon for $DEVICE" + ## Stop daemon with killproc(8) and if this fails + ## set echo the echo return value. + + if [ -x /bin/netstat ]; then + netstat -nlp 2>/dev/null \| while read prot a b local remote state prog; do + if [ "${local##:}" = "$HDDTEMP_PORT" ] ; then + if [ -n "$prog" ]; then + kill -TERM ${prog%%/} + fi + fi + done + else + echo " netstat is missing. I cannot determine if there is" + echo "listening $HDDTEMP_NAME configured via $HDDTEMP_CFG" + echo "to be stoped." + rc_failed 1 + fi + + # Remember status and be verbose + rc_status -v + ;; + try-restart) + ## Stop the service and if this succeeds (i.e. the + ## service was running before), start it again. + $0 status >/dev/null && $0 restart + + # Remember status and be quiet + rc_status + ;; + restart) + ## Stop the service and regardless of whether it was + ## running or not, start it again. + $0 stop + $0 start + + # Remember status and be quiet + rc_status + ;; + force-reload\|reload) + ## Signal the daemon to reload its config. Most daemons + ## do this on signal 1 (SIGHUP). + + echo -n "Reload service $HDDTEMP_NAME for $DEVICE" + + if [ -x /bin/netstat ]; then + netstat -nlp 2>/dev/null \| (while read prot a b local remote state prog; do + if [ "${local##:}" = "$HDDTEMP_PORT" ] ; then + LISTENING_PRG=$prog + fi + done + + if [ -n "$LISTENING_PRG" ]; then + kill -HUP ${LISTENING_PRG%%/} + else + rc_failed 7 + fi + ) + else + echo " netstat is missing. I cannot determine if there is" + echo "listening $HDDTEMP_NAME configured via $HDDTEMP_CFG" + echo "to be reloded." + rc_failed 1 + fi + + rc_status -v + + ;; + status) + echo -n "Checking for service $HDDTEMP_NAME:" + ## Check status with checkproc(8), if process is running + ## checkproc will return with exit status 0. + + # Status has a slightly different for the status command: + # 0 - service running + # 1 - service dead, but /var/run/ pid file exists + # 2 - service dead, but /var/lock/ lock file exists + # 3 - service not running + + if [ -x /bin/netstat ]; then + netstat -nlp 2>/dev/null \| ( while read prot a b local remote state prog; do + if [ "${local##:}" = "$HDDTEMP_PORT" ] ; then + LISTENING_PRG=$prog + fi + done + + if [ -n "$LISTENING_PRG" ]; then + rc_failed 0 + else + rc_failed 3 + fi + ) + else + echo " netstat is missing. I cannot determine if there is" + echo "listening $HDDTEMP_NAME configured via $HDDTEMP_CFG." + rc_failed 1 + fi + + rc_status -v + ;; + ) + echo "Usage: $0 {start\|stop\|status\|try-restart\|restart\|force-reload\|reload}" + exit 1 + ;; +esac +rc_exit
[-] [+]	Added	hddtemp.sysconfig ^
@@ -0,0 +1,19 @@ +# program name +HDDTEMP_NAME="hddtemp" + +# this file +HDDTEMP_CFG="/etc/sysconfig/hddtemp" + +# hddtemp database of supported devices +HDDTEMP_DB="/usr/share/misc/hddtemp.db" + +# hddtemp port +HDDTEMP_PORT="7634" + +# Put at least the disk(s) you want to monitor here. +# default is /dev/hda +DEVICE="/dev/sda" + +# hddtemp command line options. +HDDTEMP_ARGS="-d -f $HDDTEMP_DB -p $HDDTEMP_PORT $DEVICE" +