Changes of Revision 2
| [-] | Changed | nagios-plugins-lsi.changes |
|
x 1 2 -------------------------------------------------------------------3 +Mon Jan 2 13:03:43 UTC 2023 - Carsten Schöne <carsten.schoene@internetx.com>4 +5 +- replace draft plugin check_percraid_sas with patched version check_lsi_raid 6 +7 +-------------------------------------------------------------------8 +Mon Jan 2 12:00:53 UTC 2023 - Carsten Schöne <carsten.schoene@internetx.com>9 +10 +- add initial (draft) check_percraid_sas plugin which uses perccli instead of megacli11 +12 +-------------------------------------------------------------------13 Mon Mar 11 07:22:23 UTC 2019 - Local OBS User <cs@linux-administrator.com>14 15 - update check_megaraid_sas plugin16 |
||
| [-] | Changed | nagios-plugins-lsi.spec ^ |
|
69 1 2 #!BuildIgnore: post-build-checks3 Name: nagios-plugins-lsi4 -Version: 0.65 +Version: 1.16 Release: 17 License: GPL8 Source0: check_mpt9 10 Source1: check_megaraid_sas11 Source2: check_mpt2sas12 Source3: check_sas2ircu13 +Source4: check_lsi_raid14 #Patch1: check_megaraid_sas.diff15 Requires: perl mpt-status >= 1.2.016 Requires: megacli17 Requires: sas2ircu18 +Requires: perccli19 Group: Applications/System20 Summary: LSI Raid Plugin21 Provides: check_mpt22 23 Provides: check_megaraid24 Provides: check_mpt2sas25 Provides: check_sas2ircu26 +Provides: check_lsi_raid27 28 BuildRequires: perl29 BuildRequires: mpt-status >= 1.2.030 BuildRequires: megacli31 BuildRequires: sas2ircu32 +BuildRequires: perccli33 34 BuildRoot: %{_tmppath}/%{name}-%{version}-build35 BuildArch: noarch36 37 38 check_mpt2sas is a low level check for mpt2sas based devices using procfs and scsi generic.39 40 +check_lsi_raid uses perccli to check raid status.41 +42 %prep43 %setup -c -T44 cp %{S:0} $RPM_BUILD_DIR/%{name}-%{version}/45 46 ##patch147 cp %{S:2} $RPM_BUILD_DIR/%{name}-%{version}/48 cp %{S:3} $RPM_BUILD_DIR/%{name}-%{version}/49 +cp %{S:4} $RPM_BUILD_DIR/%{name}-%{version}/50 51 %build52 53 54 %__install -m 755 check_megaraid_sas %{buildroot}/usr/lib/nagios/plugins/55 %__install -m 755 check_mpt2sas %{buildroot}/usr/lib/nagios/plugins/56 %__install -m 755 check_sas2ircu %{buildroot}/usr/lib/nagios/plugins/57 +%__install -m 755 check_lsi_raid %{buildroot}/usr/lib/nagios/plugins/58 59 %files60 %defattr(-,root,root,0755)61 62 /usr/lib/nagios/plugins/check_mpt2sas63 /usr/lib/nagios/plugins/check_megaraid_sas64 /usr/lib/nagios/plugins/check_sas2ircu65 +/usr/lib/nagios/plugins/check_lsi_raid66 67 %changelog68 * Mon Apr 29 2013 Carsten Schoene <cs@linux-administrator.com> - 0.5-169 |
||
| [+] | Added | check_lsi_raid ^ |
| @@ -0,0 +1,1433 @@ +#!/usr/bin/perl -w +# ============================================================================= +# check_lsi_raid: Nagios/Icinga plugin to check LSI Raid Controller status +# ----------------------------------------------------------------------------- +# Created as part of a semester project at the University of Applied Sciences +# Hagenberg (http://www.fh-ooe.at/en/hagenberg-campus/) +# +# Copyright (c) 2013-2016: +# Georg Schoenberger (gschoenberger@thomas-krenn.com) +# Grubhofer Martin (s1110239013@students.fh-hagenberg.at) +# Scheipner Alexander (s1110239032@students.fh-hagenberg.at) +# Werner Sebastian (s1110239038@students.fh-hagenberg.at) +# Jonas Meurer (jmeurer@inet.de) +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of the GNU General Public License as published by the Free Software +# Foundation; either version 3 of the License, or (at your option) any later +# version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more +# details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, see <http://www.gnu.org/licenses/>. +# ============================================================================== +use strict; +use warnings; +use Getopt::Long qw(:config no_ignore_case); +use File::Which; + +our $VERBOSITY = 0; +our $VERSION = "2.5"; +our $NAME = "check_lsi_raid: Nagios/Icinga plugin to check LSI Raid Controller status"; +our $C_TEMP_WARNING = 85; +our $C_TEMP_CRITICAL = 95; +our $C_MEM_CORRECTABLE_WARNING = 0; +our $C_MEM_CORRECTABLE_CRITICAL = 0; +our $PD_TEMP_WARNING = 40; +our $PD_TEMP_CRITICAL = 45; +our $BBU_TEMP_WARNING = 50; +our $BBU_TEMP_CRITICAL = 60; +our $CV_TEMP_WARNING = 70; +our $CV_TEMP_CRITICAL = 85; +our ($IGNERR_M, $IGNERR_O, $IGNERR_P, $IGNERR_S, $IGNERR_B) = (0, 0, 0, 0, 0); +our $NOENCLOSURES = 0; +our $NOWRITEBACKOK = 0; +our $CONTROLLER = 0; + +use constant { + STATE_OK => 0, + STATE_WARNING => 1, + STATE_CRITICAL => 2, + STATE_UNKNOWN => 3, + }; + +# Header maps to parse logical and physical devices +our $LDMAP; +our @map_a = ('DG/VD','TYPE','State','Access','Consist','Cache','sCC','Size'); +our @map_cc_a = ('DG/VD','TYPE','State','Access','Consist','Cache','Cac','sCC','Size'); +our @pdmap_a = ('EID:Slt','DID','State','DG','Size','Intf','Med','SED','PI','SeSz','Model','Sp'); + +# Print command line usage to stdout. +sub displayUsage { + print "Usage: \n"; + print " [ -h | --help ] + Display this help page\n"; + print " [ -v | -vv | -vvv | --verbose ] + Sets the verbosity level. + No -v is the normal single line output for Nagios/Icinga, -v is a + more detailed version but still usable in Nagios. -vv is a + multiline output for debugging configuration errors or more + detailed information. -vvv is for plugin problem diagnosis. + For further information please visit: + http://nagiosplug.sourceforge.net/developer-guidelines.html#AEN39\n"; + print " [ -V --version ] + Displays the plugin and, if available, the version of StorCLI.\n"; + print " [ -C <num> | --controller <num> ] + Specifies a controller number, defaults to 0.\n"; + print " [ -EID <ids> | --enclosure <ids> ] + Specifies one or more enclosure numbers, per default all enclosures. Takes either + an integer as additional argument or a commaseperated list, + e.g. '0,1,2'. With --noenclosures enclosures can be disabled.\n"; + print " [ -LD <ids> | --logicaldevice <ids>] + Specifies one or more logical devices, defaults to all. Takes either an + integer as additional argument or a comma seperated list e.g. '0,1,2'.\n"; + print " [ -PD <ids> | --physicaldevice <ids> ] + Specifies one or more physical devices, defaults to all. Takes either an + integer as additional argument or a comma seperated list e.g. '0,1,2'.\n"; + print " [ -Tw <temp> | --temperature-warn <temp> ] + Specifies the RAID controller temperature warning threshold, the default + threshold is ${C_TEMP_WARNING}C.\n"; + print " [ -Tc <temp> | --temperature-critical <temp> ] + Specifies the RAID controller temperature critical threshold, the default + threshold is ${C_TEMP_CRITICAL}C.\n"; + print " [ -PDTw <temp> | --physicaldevicetemperature-warn <temp> ] + Specifies the disk temperature warning threshold, the default threshold + is ${PD_TEMP_WARNING}C.\n"; + print " [ -PDTc <temp> | --physicaldevicetemperature-critical <temp> ] + Specifies the disk temperature critical threshold, the default threshold + is ${PD_TEMP_CRITICAL}C.\n"; + print " [ -BBUTw <temp> | --bbutemperature-warning <temp> ] + Specifies the BBU temperature warning threshold, default threshold + is ${BBU_TEMP_WARNING}C.\n"; + print " [ -BBUTc <temp> | --bbutemperature-critical <temp> ] + Specifies the BBU temperature critical threshold, default threshold + is ${BBU_TEMP_CRITICAL}C.\n"; + print " [ -CVTw <temp> | --cvtemperature-warning <temp> ] + Specifies the CV temperature warning threshold, default threshold + is ${CV_TEMP_WARNING}C.\n"; + print " [ -CVTc <temp> | --cvtemperature-critical <temp> ] + Specifies the CV temperature critical threshold, default threshold + is ${CV_TEMP_CRITICAL}C.\n"; + print " [ -Im <count> | --ignore-media-errors <count> ] + Specifies the warning threshold for media errors per disk, the default + threshold is $IGNERR_M.\n"; + print " [ -Io <count> | --ignore-other-errors <count> ] + Specifies the warning threshold for other errors per disk, the default + threshold is $IGNERR_O.\n"; + print " [ -Ip <count> | --ignore-predictive-fail-count <count> ] + Specifies the warning threshold for predictive failure analysis errors per disk, the default + threshold is $IGNERR_P.\n"; + print " [ -Is <count> | --ignore-shield-counter <count> ] + Specifies the warning threshold for shield counter per disk, the default + threshold is $IGNERR_S.\n"; + print " [ -Ib <count> | --ignore-bbm-counter <count> ] + Specifies the warning threshold for bbm errors per disk, the default + threshold is $IGNERR_B.\n"; + print " [ -p <path> | --path <path>] + Specifies the path to StorCLI, per default uses the tool 'which' to get + the StorCLI path and also checks for binaries in /opt/MegaRAID/storcli.\n"; + print " [ -b <0/1/2> | --BBU <0/1/2> ] + Check if a BBU or a CacheVault module is present. One must be present unless + '-b 0' is defined. This ensures that for a given controller a BBU/CV must be + present per default. '-b 2' checks if one is present, but does not exit + CRITICAL when there is no BBU/CV.\n"; + print " [ --noenclosures <0/1> ] + Specifies if enclosures are present or not. 0 means enclosures are + present (default), 1 states no enclosures are used (no 'eall' in + storcli commands).\n"; + print " [ --nowritebackok <0/1> ] + Specifies if a WriteThrough Cache configuration is ok or not. 0 means WriteThrough is + considered Critical (default), 1 states WriteThrough is ok.\n"; + print " [ --nosudo ] + Turn off using sudo.\n"; + print " [ --nocleanlogs ] + Do not clean storcli logs after running storcli commands.\n"; +} + +# Displays a short Help text for the user +sub displayHelp { + print $NAME."\n"; + print "Pulgin version: " . $VERSION ."\n"; + print "Copyright (C) 2013-2015 Thomas-Krenn.AG\n"; + print "Current updates available at + https://github.com/thomas-krenn/check_lsi_raid.git\n"; + print "This Nagios/Icinga Plugin checks LSI RAID controllers for controller, +physical device, logical device, BBU and CV warnings and errors.\n"; + print "In order for this plugin to work properly you need to add the nagios +user to your sudoers file (or create a new one in /etc/sudoers.d/).\n"; + displayUsage(); + print "Further information about this plugin can be found at: + http://www.thomas-krenn.com/de/wiki/LSI_RAID_Monitoring_Plugin and + http://www.thomas-krenn.com/de/wiki/LSI_RAID_Monitoring_Plugin +Please send an email to the tk-monitoring plugin-user mailing list: + tk-monitoring-plugins-user\@lists.thomas-krenn.com +if you have questions regarding use of this software, to submit patches, or +suggest improvements. +Example usage: +* If StorCli can be found with 'which' or in /opt/MegaRAID/storcli + * check_lsi_raid +* check_lsi_raid -p /opt/MegaRAID/storcli/storcli64 +* check_lsi_raid -p /opt/MegaRAID/storcli/storcli64 -C 1\n"; + exit(STATE_UNKNOWN); +} + +# Prints the name and the version of check_lsi_raid. If storcli is available, +# the version of it is printed also. +# @param storcli The path to storcli command utility +sub displayVersion { + my $storcli = shift; + my $writelogs = shift; + if(defined($storcli)){ + my $command = $storcli.' -v'; + if(!$writelogs) { $command .= ' nolog'; } + my @storcliVersion = `$command`; + foreach my $line (@storcliVersion){ + if($line =~ /^\s+StorCli.*/) { + $line =~ s/^\s+|\s+$//g; + print $line; + } + } + print "\n"; + } + exit(STATE_OK); +} + +# Checks if a storcli call was successfull, i.e. if the line 'Status = Sucess' | ||
| [+] | Added | check_percraid_sas ^ |
| @@ -0,0 +1,363 @@ +#!/usr/bin/perl -w + +# check_megaraid_sas Nagios plugin +# Copyright (C) 2007 Jonathan Delgado, delgado@molbio.mgh.harvard.edu +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# +# Nagios plugin to monitor the status of volumes attached to a LSI Megaraid SAS +# controller, such as the Dell PERC5/i and PERC5/e. If you have any hotspares +# attached to the controller, you can specify the number you should expect to +# find with the '-s' flag. +# +# The paths for the Nagios plugins lib and MegaCli may need to me changed. +# +# Code for correct RAID level reporting contributed by Frode Nordahl, 2009/01/12. +# Some other code contributed by Morty Abzug, 2015-05-20 +# +# $Author: delgado $ +# $Revision: #12 $ $Date: 2010/10/18 $ + +use strict; +use Getopt::Long; +use lib qw(/usr/lib/nagios/plugins /usr/lib64/nagios/plugins); # possible pathes to your Nagios plugins and utils.pm +use utils qw(%ERRORS); + +my $megaclibin = '/usr/sbin/perccli'; # the full path to your MegaCli binary +my $megacli = "$megaclibin"; # how we actually call MegaCli +my $megapostopt = '-NoLog'; # additional options to call at the end of MegaCli arguments + +my ($adapters); +my $hotspares = 0; +my $hotsparecount = 0; +my $pdbad = 0; +my $pdcount = 0; +my $mediaerrors = 0; +my $mediaallow = 0; +my $consistency_check_is_ok = 0; +my $missing_is_ok = 0; +my $no_battery_is_ok = 0; +my $prederrors = 0; +my $predallow = 0; +my $othererrors = 0; +my $otherallow = 0; +my $result = ''; +my $status = 'OK'; +my $sudo; +my $checkbbu = 0; +my $bbu_charge_no_warning = 0; +my $check_cache; +my $do_help; + +# handle options +Getopt::Long::Configure("bundling"); +GetOptions( + "b|bbu_check" => \$checkbbu, + "B|bbu_charge_no_warning" => \$bbu_charge_no_warning, + "c|cache_check" => \$check_cache, + "h|help" => \$do_help, + "m|media_allow=i" => \$mediaallow, + "consistency_check_is_ok" => \$consistency_check_is_ok, + "missing_is_ok" => \$missing_is_ok, + "no_battery_is_ok" => \$no_battery_is_ok, + "o|other_allow=i" => \$otherallow, + "p|pred_allow=i" => \$predallow, + "s|hotspares=i" => \$hotspares, + "sudo" => \$sudo, + ); + +if ( $do_help ) { + print "Usage: $0 [-s number] [-m number] [-o number]\n"; + print " -b check Battery Back Up status\n"; + print " -B battery back up charging state is not a warning\n"; + print " -c check that current cache policy matches default policy\n"; + print " -m is the number of media errors to ignore\n"; + print " --consistency_check_is_ok consistency checks are OK\n"; + print " --missing_is_ok test returns OK if MegaCli is not present\n"; + print " --no_battery_is_ok lack of a battery is not a problem\n"; + print " -p is the predictive error count to ignore\n"; + print " -o is the number of other disk errors to ignore\n"; + print " -s is how many hotspares are attached to the controller\n"; + print " --sudo should sudo be enabled\n"; + exit; +} + +sub max_state ($$) { + my ($current, $compare) = @_; + + if (($compare eq 'CRITICAL') || ($current eq 'CRITICAL')) { + return 'CRITICAL'; + } elsif ($compare eq 'OK') { + return $current; + } elsif ($compare eq 'WARNING') { + return 'WARNING'; + } elsif (($compare eq 'UNKNOWN') && ($current eq 'OK')) { + return 'UNKNOWN'; + } else { + return $current; + } +} + +sub exitreport ($$) { + my ($status, $message) = @_; + + print STDOUT "$status: $message\n"; + exit $ERRORS{$status}; +} + + +# Some sanity checks that you actually have something where you think MegaCli is +if (! -e $megaclibin) { + if ($missing_is_ok) { + exitreport($status, "$megaclibin is not present, missing_is_ok set") + } else { + exitreport('UNKNOWN',"error: $megaclibin does not exist"); + } +} + +$megacli="sudo $megacli" if $sudo; + +# Get the number of RAID controllers we have +open (ADPCOUNT, "$megacli -adpCount $megapostopt |") + || exitreport('UNKNOWN',"error: Could not execute $megacli -adpCount $megapostopt"); + +while (<ADPCOUNT>) { + if ( m/Controller Count:\s*(\d+)/ ) { + $adapters = $1; + last; + } +} +close ADPCOUNT; + +exitreport('UNKNOWN',"error: unable to get controller count") + if !defined $adapters; + +ADAPTER: for ( my $adp = 0; $adp < $adapters; $adp++ ) { + $result .= "$adp:"; + # Get the Battery Back Up state for this adapter + my ($bbustate); + if ($checkbbu) { + open (BBUGETSTATUS, "$megacli -AdpBbuCmd -GetBbuStatus -a$adp $megapostopt |") + || exitreport('UNKNOWN', "error: Could not execute $megacli -AdpBbuCmd -GetBbuStatus -a$adp $megapostopt"); + + my ($bbucharging, $bbufullycharged, $bburelativecharge, $bbuexitcode); + my ($batterystate, $batteryreplacement, $issohgood); + while (<BBUGETSTATUS>) { + # Charging Status + if ( m/Charging Status\s*:\s*(\w+)/i ) { + $bbucharging = $1; + } elsif ( m/Battery State\s*:\s*(\w+.*)/i) { # sometimes contains a space + $batterystate = $1; + } elsif ( m/Fully Charged\s*:\s*(\w+)/i ) { + $bbufullycharged = $1; + } elsif ( m/Relative State of Charge\s*:\s*(\w+)/i ) { + $bburelativecharge = $1; + } elsif ( m/Exit Code\s*:\s*(\w+)/i ) { + $bbuexitcode = $1; + } elsif ( m/^\s*Battery Replacement required\s*:\s(\w+)\s*$/i) { + $batteryreplacement = $1; + } elsif ( m/^\s*isSOHGood\s*:\s*(\w+)\s*$/i) { + $issohgood = $1; + } + } + close BBUGETSTATUS; + + # Determine the BBU state + if ( !defined $bbuexitcode || $bbuexitcode ne '0x00' ) { + if (!$no_battery_is_ok) { + $bbustate = 'NOT FOUND'; + $status = max_state($status, 'CRITICAL'); + } else { + $bbustate = 'not found which could be ok'; + } + } elsif ( lc $batteryreplacement ne 'no' ) { + $bbustate = 'battery needs replacing'; + $status = max_state($status, 'CRITICAL'); + } elsif ( defined $issohgood && lc $issohgood ne 'yes' ) { + $bbustate = 'battery SOH is not good'; + $status = max_state($status, 'CRITICAL'); + } elsif ( $bbucharging ne 'None' && !$bbu_charge_no_warning) { + $bbustate = 'Charging (' . $bburelativecharge . '%)'; + $status = max_state($status, 'WARNING'); + } elsif ( defined $bbufullycharged && $bbufullycharged ne 'Yes' && !$bbu_charge_no_warning) { + # some adapters don't report on "Fully Charged", so + # it's OK if it's not defined. + $bbustate = 'Not Charging (' . $bburelativecharge . '%)'; + $status = max_state($status, 'WARNING'); | ||