Dependency of ::import::i586::libtag_c0-32bit-1.7-7.4.x86_64.rpm
Name: sane-backends-autoconfig
Project: SLE_11_SP4
Repository: oss
Title: USB Scanner Autoconfiguration
Description:
USB scanner autoconfiguration happens via udev.
The file /etc/udev/rules.d/56-sane-backends-autoconfig.rules contains
entries for those USB scanners where the USB IDs are known, which are
supported by a free driver, where the support status is "complete" or
"good", and which do not require firmware upload.
When a USB scanner is connected and its USB IDs match to an entry in
the 56-sane-backends-autoconfig.rules file, the matching scanner driver
is activated (i.e. the driver line in /etc/sane.d/dll.conf is
activated).
It enables scanner drivers but never disables them. The reason is that
enabled drivers do not hurt so that an automated disable would make it
only overcomplicated because when more than one scanner uses the same
driver, a complicated check would be needed to avoid that the driver is
accidentally disabled when only one scanner was disconnected.
Note that driver activation alone is not sufficient to have a usable
"scanner autoconfiguration" for the user. What is also needed are
appropriate USB device file permissions so that the user's scanning
software can access the device. But this is already in place via the
HAL 70-scanner.fdi file which triggers the resmgr to grant access
permissions for the user who is currently locally logged in (i.e. who
works directly at the computer where the USB scanner is).
If you do not like automated driver activation, do not install this
package or remove it when it is already installed.
Authors:
--------
Johannes Meixner <jsmeix@novell.com>
Version: 1.0.20
Release: 7.6.1
Architecture: x86_64
Size: 19.6 KB
Build Time: 2011-10-18 16:09:05 +0200 (almost 13 years ago)
Provides
Symbol | Required by |
---|---|
sane-backends-autoconfig = ... |
Requires
Symbol | Provided by |
---|---|
sane-backends | sane-backends |